Please note: The High-Mid Level Workstation is being developed.
Please note: The High-Mid Level Workstation is being developed.
When you mentioned having Samsung and Kingston RAM, I assumed they were DDR4 modules. For memory options, I recommend G.Skill TridentZ Series 32GB (2 x 16GB) DDR4-3000, pcpp: http://pcpartpicker.com/product/7htWGX/g...0c15d32gtz Reason: This is the fastest 32GB kit supported by MoBo according to AsRock: http://www.asrock.com/mb/Intel/Fatal1ty%...cat=Memory The second option would be G.Skill TridentZ Series 32GB (2 x 16GB) DDR4-2800, pcpp: http://pcpartpicker.com/product/r68H99/g...0c14d32gtz The third choice is Corsair Vengeance LPX 32GB (2 x 16GB) DDR4-2666, pcpp: http://pcpartpicker.com/product/nDx9TW/c...2a2666c16r The first two kits are priced above 200€, but this one should be under that amount. I didn’t check whether AsRock supports SLI. That was an oversight. I assumed such high-end modules would have it. At least top-tier MSI models do support SLI. Even though your system doesn’t support SLI, it does handle AMD Quad CrossFireX and CrossFireX. AMD’s CFX offers benefits over Nvidia’s SLI, for example—CFX allows more monitors with different sizes, whereas SLI is limited to a maximum of three monitors all the same size.
Don't stress about the SLI-tip. It restricts my decision-making, which is fine here. I'm trying to keep my knowledge current on GPUs, and it seems Nvidia is still a strong option in 3D creation.
I'm really glad I didn't end up with the Rmx550w!
A friend has a G.Skill Ripjaws V (2x8GB) F4-3400C16D-16GVK for around 100€, and I'm quite interested. However, I think I'll sell it in about six months and will review your advice before making a final decision.
The prices are all quite similar, so the ~20€ difference isn't surprising anymore.
I was wondering if buying the Ripjaws V (16BG) and adding a 32BG Trident.Z later would be feasible or not.
The RAM offered by your friend isn't listed in the supported RAM list provided by the AsRock. Here's 50:50 chance if this RAM does or doesn't work in your MoBo. The chance is 50:50 because MoBo makers don't test all the different RAMs that are out there. They only list the tested RAMs.
As far as adding 32GB set to the 16GB set, i need to know each RAM set part number, so, i can look up the RAM CAS Latency, timings and voltage. Those three must match in order to make them work side by side.
Absolutely, I also double-checked that now since you mentioned it. I had to pass on the order. I’ll just need to purchase a kit. I’m thinking the G.Skill TridentZ Series 32GB (2 x 16GB) DDR4-3000 would work best. I can scale up later if needed, and it’s at its maximum capacity. The price difference compared to other kits in that range is around 30€.
I just found a kit for under 200€ with shipping included. I’ll share an update and maybe some photos once I receive the next set of parts.
I went with the G.Skill TridentZ Series 32GB (2 x 16GB) DDR4-3000 and I'm extremely satisfied. The only remaining component I'm using is the GPU (ATI FirePro V4800), and the PC is exceeding my expectations. It even runs Star Citizen alpha 2.6 fairly well in FHD, though with low FPS and not perfectly smooth. However, stable playable frame rates are achieved at lower resolutions or windowed games. For work purposes, the computer is optimal—all 3D applications run quickly, and I can render scenes efficiently in Unreal Engine, even though the GPU gets quite hot (around 70°C). The best part is the startup time, which is about 20 seconds to reach desktop mode.
I ran a PassMark Test and here are the results:
Total: 4123.5 (86th percentile)
CPU: 10170 (89th)
2D Graphics: 993.2 (94th)
3D Graphics: 1382.5 (54th)
Memory: 2420 (84th)
Drive: 4747.6 (95th)
The performance is impressive, especially considering the old i3-530 PC. I'm also surprised by the temperatures:
Idle:
CPU 28.5°C
SSD 23°C
GPU ~55°C
Full Load after 10 mins, tested with IntelBurn (High)
CPU max: 69°C
CPU avg: 53°C
All tests were done at room temperature (20°C). I'm considering two improvements for the build: upgrading to an AMD RX 480 instead of the GTX1060, and implementing a smarter cooling management/fan control tool under load. If anyone has recommendations on the latter, please share.
Regarding the GPU, I was thinking about replacing it with an AMD RX 480, given its low cost now and the fact that many HBM GPUs will appear in 2017, making any 'future-proof' purchase less relevant. Any thoughts?
It's nice to know you're satisfied with your new PC. For cooling, with the Elite 332 case, you can use one 120mm front intake, one 120mm rear exhaust, and a fan on the side panel—though the exact size is unclear as no details about mounting are available. Based on the photo, the side fan mount seems to be either 80mm or 120mm. You might consider the RX 480 if you prefer it; it offers similar performance to the GTX 1060 6GB. For comparison, see the link provided.
I've just begun a fresh project, so I thought it was a good idea to revisit this and express my gratitude to @Aeacus for helping with the component selection. You're right, I'm still working on that build and have been really satisfied with the PC over the past decade. Starting anew is challenging since it's not fully compatible with Windows 11. Thanks again!