Please note: The High-Mid Level Workstation is being developed.
Please note: The High-Mid Level Workstation is being developed.
It's nice to know you're satisfied with your new PC. For cooling, with the Elite 332 case, you can use one 120mm front intake, one 120mm rear exhaust, and a fan on the side panel—though the exact size is unclear as no details about mounting are available. Based on the photo, the side fan mount seems to be either 80mm or 120mm. You might consider the RX 480 if you prefer it; it offers similar performance to the GTX 1060 6GB. For comparison, see: http://gpu.userbenchmark.com/Compare/AMD...3634vs3639
Your setup has room for enhancement. PCPartPicker part list Price details by seller CPU: Intel Core i7-6700K 4.0GHz Quad-Core Processor ($339.99 @ Newegg) CPU Cooler: Deepcool GAMMAXX 400 74.3 CFM CPU Cooler ($24.99 @ Newegg) Motherboard: ASRock Fatal1ty Z170 Gaming K4 ATX LGA1151 Motherboard ($97.98 @ Newegg) Storage: SK hynix SL308 250GB 2.5" Solid State Drive ($65.99 @ SuperBiiz) Video Card: MSI GeForce GTX 1050 Ti 4GB Video Card ($139.99 @ B&H) Case: Cooler Master Elite 335 ATX Mid Tower Case (Purchased for free) Power Supply: Corsair RMx 550W 80+ Gold Certified Fully-Modular ATX Power Supply ($96.90 @ B&H) Overall cost: $752.84 Includes shipping, taxes, and applicable discounts Generated by PCPartPicker 2016-11-11 09:54 EST-0500 Selected CPU cooler information: Motherboard choice rationale: Storage selection details: Power supply recommendation: Regarding the GPU, adding an extra $20 unlocks 4GB of VRAM. As you already have RAM installed, I omitted it. Otherwise, I would have chosen this model: G.Skill Ripjaws Series 16GB (4 x 4GB) DDR4-3000 PCP review: http://pcpartpicker.com/product/LTvRsY/g...0c15q16grr Reason for selection:
I find these optimizations quite intriguing because the overall cost remains similar to my original plan, and your recommendations really resonate with me. Thanks, Aeacus!
Regarding the CPU cooler, MoBo, and SSD, I agree — thanks for sharing the reviews without much discussion. 😀
Would you consider facing problems with my used Tower, GPU, PSU, and RAM? It makes sense to upgrade these components later (or not at all), as long as it doesn’t require more power for a new GPU, etc.
I don’t really want small upgrades (~20$/€) unless there’s a clear reason I’m unaware of. 😀
Researched that as well - my PSU is basically a blue-light with a 220V jack. -.- Thanks for the heads up!
I think the RMx550 might just do fine. As for picking a higher wattage I think the Seasonic Prime 650 is too expansive despites it's outstanding review and the Titanium class qualities. In case I need more power, I'm considering the RMx650, which has a decent performance and is in the same price segment - or am I very wrong here? I think the price might be ok, but doubling the PSU budget for 100W more seems to be a large jump. (Is it a trap to save money here?)
Concerning GPU, I made a mistake in my first partspicker list: I have an ATI FirePro V4800, which of course isn't top-of-the-notch, but will suffice for a couple of months to come (my work is more cpu-consuming and I have no time to play currently). My GPU still reaches about 1000 points in the PassMark benchmark (I know, lol: http://www.videocardbenchmark.net/gpu.ph...800&id=433).
I still don't know if something like a PNY quadro (e.g K2200) or a GTX (e.g.1070) will be the better choice for my needs, because I have no experience whatsoever with workstation GPUs, but I still have time to research and from what I've been reading, prices might drop too soon.
As for RAM: I agree that an intermediate goal should be 16GB or more. I went with your ASRocks Fatal1ty K4 suggestion and that MoBo has enough head-room.
In terms of storage, I am a little curious about M2 SSDs like the "Intel 600p", but I'm also reluctant to buy a half baked cake. Any hint on when it's worth to invest in a PCIe OS storage appreciated.
For me the SK Hynix SL308 (250GB) comes as a good alternative and seems like the best choice.
For a 600W power supply, Corsair RMx 650 is a viable option. However, I lean towards Seasonic products.
Corsair does not manufacture their own PSUs; they procure them from OEM suppliers mainly from Channel Well Technology. Their premium AX series is typically sourced from Seasonic. Seasonic also offers its own PSUs under its brand name. Checking the PSU tier list reveals that Seasonic supplies power solutions to well-known brands such as Antec, Cooler Master, Corsair, EVGA, Fractal Design, and XFX.
Here’s a snapshot of Seasonic’s current offerings in the 350-750W category:
https://seasonic.com/product-category/co...e-range=33
Regarding Corsair RMx versus Seasonic PRIME, Corsair RMx is considered tier three, whereas Seasonic PRIME is tier one, which explains the price gap.
For your current workstation setup, a Corsair RMx 550 should suffice. However, if you plan to upgrade to a high-end system—such as a Skylake with top-tier specs—opting for the PRIME 650 would be logical.
Since you previously listed your GPU incorrectly, here’s a comparison between the FirePro V4800 and the GTX 1050 Ti:
http://gpu.userbenchmark.com/Compare/ATI...9332vs3649
And another comparison between the GTX 1050 Ti and the GTX 1070:
http://gpu.userbenchmark.com/Compare/Nvi...3649vs3609
The i7-6700K paired with a GTX 1070 delivers excellent results for high-end workstations, gaming, or overclocking.
Adding a 600W PSU like the Seasonic PRIME 650 allows running two GTX 1070s in a 2-way SLI configuration without issues.
You should consider your future goals when choosing. If you stick with Corsair RMx 550, a GTX 1070 is ideal. But if aiming for a premium high-end rig, the PRIME 650 is worth it.
For a comparison of performance, you can view:
- Corsair RMx vs GTX 1070
- GTX 1050 Ti vs GTX 1070
These components pair well with an i7-6700K and will give you a top-tier workstation or gaming experience.
Here’s the revised version maintaining the original meaning and tone while adjusting the phrasing:
I wanted to confirm once more the current build details. The setup includes a Cooler Master Elite 332 mid-tower, paired with an Intel Core i7-6700K processor running at 4.0GHz with four cores. The CPU cooler selected is a Deepcool GAMMAXX 400 model delivering 74.3 CFM airflow. The motherboard in use is the ASRock Fatal1ty Z170 Gaming K4 ATX model compatible with LGA1151. Memory consists of a Kingston/Samsung configuration of four 2GB modules, planned for future upgrades aimed at video editing. The storage component is an SK hynix SL308 250GB SSD measuring 2.5 inches. The graphics card currently runs a Firepro V4800 and is expected to be upgraded to a GTX 1070 later on. The power supply chosen is a Corsair RMx 550W unit, certified for 80+ Gold standards and fully modular. I considered adding an M.2 SSD, but decided against it at the moment. Instead, I opted for a larger capacity 500GB Hynix drive to avoid limiting storage options and to better utilize space on the hard drive. The additional cost is only 50€, which seems justified. I’m also excited about the possibility of running two GTX cards in SLI configuration. Presently, my expenses are around 700€, excluding upcoming RAM and GPU upgrades – a solid figure. Unfortunately, many US retailers don’t ship to Austria, prices remain low, and I might have saved about 300€ if I’d placed an order during the election period.
Cheers
-moegerbyte
Your build appears fine. I've also noticed that prices in the USA are lower compared to Europe. In Europe, there are many different regulations which can make almost everything cost more than it does in the States. Just for reference: two GTX 1070s connected via a 2-way SLI at full speed use around 330W. Adding the rest of the system at about 200W brings the total peak to roughly 530W. That's getting quite close when using a 550W power supply.
Thanks to your constructive help, amongst others
Additionally if you order from here, the availability and delivery times are horriffic for some products. Even Amazon would only 'start' shipping Nov. 28th. -.- Picking up stuff locally adds an average 5-15% to the total price. What a sad globalized world...
However: I kicked the RMx550w and went with it's big brother instead: The RMx 650w is quiet like a passive PSU most of the time, costs only ~15€ more and apparently is very stable. Good €/perf. values and the overall performance convinced me to go with the Corsair instead of e.g. the Seasonic Prime (which allegedly is way ahead in both, price and performance). Additionally I let myself be convinced by the 10 years warranty. I hope it's a good sing.
😀
I'll post an update on the build as soon as I get hold of the first parts and start putting things together!
Current set-up:
Case: Cooler Master Elite 332 (mid tower)
CPU: Intel Core i7-6700K 4.0GHz Quad-Core Processor
CPU Cooler: Deepcool GAMMAXX 400 74.3 CFM CPU Cooler
Motherboard: ASRock Fatal1ty Z170 Gaming K4 ATX LGA1151 Motherboard
Memory: My current Kingston / Samsung set-up of 4x2GB, with later upgrade for video editing
Storage: SK hynix SL308 250GB 2.5" Solid State Drive
Video Card: currently Firepro V4800 with immanent upgrade to GTX 1070 at a later point
Power Supply: Corsair RMx 650W 80+ Gold Certified Fully-Modular ATX Power Supply
There are also Tier two Seasonic PSUs available. In the 600W range, options include S12II-620, M12II-620 EVO, S12G-650 or G-650.
In Tier one, you can find X-650, Platinum 660 and PRIME 650.
Regarding warranty, only the PRIME series offers a 10-year guarantee. The X and Platinum series provide 7 years, while others have 5 years.
Corsair RMx models work well, particularly if you're on a tighter budget and prefer not to spend over 200 euros on a PSU alone.
😀
I noticed you have the 250GB SL308 listed. What about the 500GB SL308?
😛
Could you share your Kingston and Samsung RAM part numbers so I can check CAS latency, timings, and voltage? Those three must match for all four sticks to function together.
Oh yeah and sorry - my bad! Those 250GB were just a c+p-typo. Most of the stuff has been delivered until today, naturally I ordered the SL308 with 500GB of capacity: For that special Everyday-Decadent-Roman-Emperor-Comfort 😀 I also picked up CPU, MoBo and received the Cooler and the PSU last Friday I went with the RMx 650 by the way and I love how you don't even know it's running I breadboarded MoBo, CPU, Cooler and PSU and (aaalmost) finished the platform tonight - I got to three beeps! Yay! And well. About that? I'm currently banging my head against the wall in shame as well as trying to kick myself simultaneously - Remember how I wrote about how I had these two pairs of memory set up and running just fine in another (old) i3-503 build and wanted to borrow these for the new machine? Well... idiot-me hadn't considered how the DDR3 and DDR4 are completely different MK and are super-incompatible fffffffffuu... Anyway, this leaves me with yet another difficult decision...:/ Having considered the G.Skill Ripjaws 4 suggestion, I'm now thinking that a 4x4GB kit won't be the best solution if I'm planning to go for more later. Actually it would be the cool to just pick up a single 16GB RAM and add more later 😀 But I realize that's might not be entirely possible ^^ (eventhough they're being sold single sometimes... oO). The grown-up approach here is to get a reliable top-of-the-notch 32GB memory kit and deal with dat shit just costing money, adding more later in case need arises. The idea of successively adding more RAM is probably just my fantasy of leaving all the money issues to future-me, right? The only things I'm pretty sure of are, for one that I don't want to 'block' DIMM space with RAM kits that I'll have to resell or throw if I need more in the future and secondly that I currently don't want to spend more than another 200€ on whatever memory I'll get for that. Does that make sense?:/ What's your opinion on that? By the way: I just found out that the AsRock Fatal1ty K4 Z170 MoBo does not support two GPUs in SLI. Guess I'll be starting out with a stronger single GPU then. (See here for reference: Cheers!