F5F Stay Refreshed Hardware Desktop Performance improves significantly across all processors at 4.3 ghz

Performance improves significantly across all processors at 4.3 ghz

Performance improves significantly across all processors at 4.3 ghz

Pages (3): Previous 1 2 3 Next
M
MikeDragon159
Senior Member
661
12-22-2020, 04:08 AM
#11
I had PBO enabled by default, but after switching to an MSI MMO, I opted to activate CPU Boost. I’m not very familiar with PBO or its settings, so I’m unsure if I should revert it. Any advice would be appreciated.
M
MikeDragon159
12-22-2020, 04:08 AM #11

I had PBO enabled by default, but after switching to an MSI MMO, I opted to activate CPU Boost. I’m not very familiar with PBO or its settings, so I’m unsure if I should revert it. Any advice would be appreciated.

Z
ztgamme
Member
59
12-22-2020, 07:32 AM
#12
Intake performs well too. The o11 works best when all intake ports are open and no exhaust is blocked.
Z
ztgamme
12-22-2020, 07:32 AM #12

Intake performs well too. The o11 works best when all intake ports are open and no exhaust is blocked.

D
Dat_Asian_
Member
146
12-25-2020, 09:14 AM
#13
It could enhance thermals noticeably, depending on the setup. When I say "leave back open," I mean allowing airflow through the rear section—such as the area behind the cables or the back panel—to improve airflow and lift generation.
D
Dat_Asian_
12-25-2020, 09:14 AM #13

It could enhance thermals noticeably, depending on the setup. When I say "leave back open," I mean allowing airflow through the rear section—such as the area behind the cables or the back panel—to improve airflow and lift generation.

S
SorcererVevo
Member
180
12-26-2020, 12:35 AM
#14
Running at idle temperatures between 50-60°C is quite intense, especially with the 5800X3D and X62 setup. NZXT's cooling solutions aren't top-tier, but they should still function adequately. My system has a smaller case and reaches 60°C during gaming and 87°C when doing core rendering/compiling. It should be simpler for your AIO to handle on the chip. For context, this is my typical setup (covers not shown in photo but present).
S
SorcererVevo
12-26-2020, 12:35 AM #14

Running at idle temperatures between 50-60°C is quite intense, especially with the 5800X3D and X62 setup. NZXT's cooling solutions aren't top-tier, but they should still function adequately. My system has a smaller case and reaches 60°C during gaming and 87°C when doing core rendering/compiling. It should be simpler for your AIO to handle on the chip. For context, this is my typical setup (covers not shown in photo but present).

M
McILucky
Member
194
12-26-2020, 04:33 AM
#15
On the rear panel, avoid placing fans there. That’s better. Aio adds a few extra cooling points, though it might push temperatures up and also ensure the pump runs close to full capacity.
M
McILucky
12-26-2020, 04:33 AM #15

On the rear panel, avoid placing fans there. That’s better. Aio adds a few extra cooling points, though it might push temperatures up and also ensure the pump runs close to full capacity.

H
Hollyleaf81
Junior Member
29
12-26-2020, 05:27 AM
#16
It looks like reinstalling NZXT CAM and setting the pump to 100% caused it to behave similarly to other users' 5800XS—delivering around 4.5 GHz across all cores while maintaining high temperatures. The idle temps stayed between 50–60°C. It seems the CPU briefly reached 4.5 GHz after consistently running at 4.3 GHz, though this wasn’t what I expected. Updated August 24, 2023 by Agar143
H
Hollyleaf81
12-26-2020, 05:27 AM #16

It looks like reinstalling NZXT CAM and setting the pump to 100% caused it to behave similarly to other users' 5800XS—delivering around 4.5 GHz across all cores while maintaining high temperatures. The idle temps stayed between 50–60°C. It seems the CPU briefly reached 4.5 GHz after consistently running at 4.3 GHz, though this wasn’t what I expected. Updated August 24, 2023 by Agar143

P
PochTG
Junior Member
41
12-31-2020, 03:39 AM
#17
I followed your suggestions and added more fans to the intake, but the problem persists. My performance in Valorant remains the same or even gets worse when using a 5600x. Are there other steps I should consider besides swapping the CPU?
P
PochTG
12-31-2020, 03:39 AM #17

I followed your suggestions and added more fans to the intake, but the problem persists. My performance in Valorant remains the same or even gets worse when using a 5600x. Are there other steps I should consider besides swapping the CPU?

N
NorthwestSun
Member
202
01-08-2021, 07:19 AM
#18
My cooler isn’t sufficient. I’d swap the CPU just for the better 5800x3D. But neither will run well with an x63.
N
NorthwestSun
01-08-2021, 07:19 AM #18

My cooler isn’t sufficient. I’d swap the CPU just for the better 5800x3D. But neither will run well with an x63.

B
BrackenYT
Member
60
01-08-2021, 09:10 AM
#19
It's unusual but you're still managing to play Valorant below 80 FPS. Do you have any suggestions for 280mm AIOs that could improve your performance?
B
BrackenYT
01-08-2021, 09:10 AM #19

It's unusual but you're still managing to play Valorant below 80 FPS. Do you have any suggestions for 280mm AIOs that could improve your performance?

M
MagiicCraft
Member
107
01-08-2021, 06:07 PM
#20
It's all about the CPU performance. For a budget option, go with an Arctic Liquid Freezer 360 or 420 and pair it with an AIO. A better air cooler would be ideal. The Ak360 works fine. The Dark Rock Pro 4 performs well too.
M
MagiicCraft
01-08-2021, 06:07 PM #20

It's all about the CPU performance. For a budget option, go with an Arctic Liquid Freezer 360 or 420 and pair it with an AIO. A better air cooler would be ideal. The Ak360 works fine. The Dark Rock Pro 4 performs well too.

Pages (3): Previous 1 2 3 Next