F5F Stay Refreshed Hardware Desktop PC fails to start using GSkill Trident Z at 4266 MHz

PC fails to start using GSkill Trident Z at 4266 MHz

PC fails to start using GSkill Trident Z at 4266 MHz

Pages (3): 1 2 3 Next
J
josiecatz__10
Senior Member
640
07-07-2025, 01:17 AM
#1
In short, I purchased 32GB of Trident RGB at 3200MHz and accidentally received 16GB of Trident Z Royal at 4266MHz. My PC isn’t booting with XMP enabled, but I’m curious—can I try a lower frequency like 3800MHz CL-17-17-17-36 instead?
J
josiecatz__10
07-07-2025, 01:17 AM #1

In short, I purchased 32GB of Trident RGB at 3200MHz and accidentally received 16GB of Trident Z Royal at 4266MHz. My PC isn’t booting with XMP enabled, but I’m curious—can I try a lower frequency like 3800MHz CL-17-17-17-36 instead?

B
Blureux
Posting Freak
797
07-07-2025, 10:02 AM
#2
I’d really consider giving it back if you could. You might attempt slower speeds with tighter timing, but I’d prefer to keep the original price.
B
Blureux
07-07-2025, 10:02 AM #2

I’d really consider giving it back if you could. You might attempt slower speeds with tighter timing, but I’d prefer to keep the original price.

T
trixie2303
Junior Member
36
07-07-2025, 02:32 PM
#3
How did you manage the cost? Tridentz Royals tend to be expensive, especially the top-tier models. Instead of trading it back, you might want to sell it with a markup. High-speed kits are usually overpriced, offering poor value overall. Only when high speed is essential—like with cheap sticks and aggressive tuning—does it make sense. For example, crucial ballistix can push 4500+ MHz depending on your setup. On a 32GB system, go for ballistix; otherwise, stick to 4000 CL16 unless it's clearly overpriced. They're single-rank parts, so you still have the freedom to push them to 4500+ MHz if needed.
T
trixie2303
07-07-2025, 02:32 PM #3

How did you manage the cost? Tridentz Royals tend to be expensive, especially the top-tier models. Instead of trading it back, you might want to sell it with a markup. High-speed kits are usually overpriced, offering poor value overall. Only when high speed is essential—like with cheap sticks and aggressive tuning—does it make sense. For example, crucial ballistix can push 4500+ MHz depending on your setup. On a 32GB system, go for ballistix; otherwise, stick to 4000 CL16 unless it's clearly overpriced. They're single-rank parts, so you still have the freedom to push them to 4500+ MHz if needed.

M
Madthunder2t3
Member
195
07-08-2025, 12:33 AM
#4
The amount was 105 USD based on today's rate.
M
Madthunder2t3
07-08-2025, 12:33 AM #4

The amount was 105 USD based on today's rate.

N
Nikoo
Junior Member
21
07-14-2025, 08:50 PM
#5
Execute at 3800 14-14-14. That’s solid RAM.
N
Nikoo
07-14-2025, 08:50 PM #5

Execute at 3800 14-14-14. That’s solid RAM.

_
_wolfie10_
Member
99
07-16-2025, 04:14 PM
#6
Consider pricing it at 120 or more; someone will definitely be interested regardless. Fast performance is better, so grab it quickly. These RAMs are solid for speed but offer lower value overall. If you need decent performance without much effort, go with Ballistix—it won’t match the top models but will keep your clock running well when most other options are dual-rank.
_
_wolfie10_
07-16-2025, 04:14 PM #6

Consider pricing it at 120 or more; someone will definitely be interested regardless. Fast performance is better, so grab it quickly. These RAMs are solid for speed but offer lower value overall. If you need decent performance without much effort, go with Ballistix—it won’t match the top models but will keep your clock running well when most other options are dual-rank.

D
DJBazzInc
Member
231
07-16-2025, 06:10 PM
#7
Enable XMP and adjust the DRAM frequency manually to 4000MHz. Check if it works. If successful, proceed to fine-tune the timing settings. Using 1.45V with this configuration should work fine. Running at 17-17-17 at 4000MHz is expected. Alternatively, gradually raise the DRAM speed from 4000 to 4267MHz in steps of 19MHz. Be cautious about the controller's limits. Good luck!
D
DJBazzInc
07-16-2025, 06:10 PM #7

Enable XMP and adjust the DRAM frequency manually to 4000MHz. Check if it works. If successful, proceed to fine-tune the timing settings. Using 1.45V with this configuration should work fine. Running at 17-17-17 at 4000MHz is expected. Alternatively, gradually raise the DRAM speed from 4000 to 4267MHz in steps of 19MHz. Be cautious about the controller's limits. Good luck!

D
DuyD
Member
176
07-16-2025, 07:55 PM
#8
Testing at 4000 MHz using 17-17-17-37 frequency and 1.45 V. Might be best to proceed soon.
D
DuyD
07-16-2025, 07:55 PM #8

Testing at 4000 MHz using 17-17-17-37 frequency and 1.45 V. Might be best to proceed soon.

T
thanasisvat
Member
76
07-23-2025, 12:48 PM
#9
Expect solid performance. I own the identical build. The 105$ kit for a 300+$$ memory is an excellent offer. If TiaphoonBurner is correct, the temp rating B on A2 PCB indicates keeping Dimms under 45°C will deliver great stability and speed. Monitor with HWInfo64 while stressing it—lower temps are better.
T
thanasisvat
07-23-2025, 12:48 PM #9

Expect solid performance. I own the identical build. The 105$ kit for a 300+$$ memory is an excellent offer. If TiaphoonBurner is correct, the temp rating B on A2 PCB indicates keeping Dimms under 45°C will deliver great stability and speed. Monitor with HWInfo64 while stressing it—lower temps are better.

G
Goldenowl01
Member
204
07-23-2025, 07:57 PM
#10
It's a solid RAM, and I'm wondering if they can fit in 4000 15-15-15 units at about 1.475 GB. Could they possibly achieve that with fewer?
G
Goldenowl01
07-23-2025, 07:57 PM #10

It's a solid RAM, and I'm wondering if they can fit in 4000 15-15-15 units at about 1.475 GB. Could they possibly achieve that with fewer?

Pages (3): 1 2 3 Next