F5F Stay Refreshed Hardware Desktop PC Crashes Within Seconds, Occasionally After 20-30 Seconds Of Cleaning

PC Crashes Within Seconds, Occasionally After 20-30 Seconds Of Cleaning

PC Crashes Within Seconds, Occasionally After 20-30 Seconds Of Cleaning

Pages (3): Previous 1 2 3 Next
S
sst04
Member
208
08-27-2023, 05:32 PM
#11
Ddr3 motherboard, gigabyte model, gtx 1660 graphics card, i5-3330 processor, 8GB RAM
S
sst04
08-27-2023, 05:32 PM #11

Ddr3 motherboard, gigabyte model, gtx 1660 graphics card, i5-3330 processor, 8GB RAM

C
CoolKid898
Member
63
08-29-2023, 05:53 PM
#12
You understand the issue clearly. You might consider sending a return request if possible. It's frustrating, and putting together the PC from scratch is really tough. But it looks like you have the skills, so hopefully the next version will be better.
C
CoolKid898
08-29-2023, 05:53 PM #12

You understand the issue clearly. You might consider sending a return request if possible. It's frustrating, and putting together the PC from scratch is really tough. But it looks like you have the skills, so hopefully the next version will be better.

S
shelbycobra500
Junior Member
3
08-29-2023, 07:25 PM
#13
You can purchase those types of motherboards from eBay at low prices. Here’s a guide to supported boards: choose models mentioning "bios version; any" and then look for the specific model once you identify it. If you’re unsure about the BIOS, contact the seller—it’s better for older parts.
S
shelbycobra500
08-29-2023, 07:25 PM #13

You can purchase those types of motherboards from eBay at low prices. Here’s a guide to supported boards: choose models mentioning "bios version; any" and then look for the specific model once you identify it. If you’re unsure about the BIOS, contact the seller—it’s better for older parts.

H
Haltair606
Member
63
09-06-2023, 04:27 AM
#14
I've got a Maximus VII Hero with a CPU, but the motherboard isn't responding at all—it won't power on even though the lights are on. A few pins in the CPU socket seem damaged. Should we attempt to get it to work?
H
Haltair606
09-06-2023, 04:27 AM #14

I've got a Maximus VII Hero with a CPU, but the motherboard isn't responding at all—it won't power on even though the lights are on. A few pins in the CPU socket seem damaged. Should we attempt to get it to work?

T
TheDJKat
Member
55
09-06-2023, 12:42 PM
#15
Notice the harm, and only two pins are damaged it could be fixed. It's tough to fix without proper training. If it doesn't work, the pin likely needs swapping. This is difficult because the pin is tiny. I'm unfamiliar with pin replacement, but you'd need a soldering iron with a fine tip and a magnifying glass plus the pin. If you lack experience or tools, swapping a new board might be the best choice.
T
TheDJKat
09-06-2023, 12:42 PM #15

Notice the harm, and only two pins are damaged it could be fixed. It's tough to fix without proper training. If it doesn't work, the pin likely needs swapping. This is difficult because the pin is tiny. I'm unfamiliar with pin replacement, but you'd need a soldering iron with a fine tip and a magnifying glass plus the pin. If you lack experience or tools, swapping a new board might be the best choice.

L
LoveKnights
Member
82
09-06-2023, 01:38 PM
#16
Thank you for your feedback. I'll keep them in mind. Have a great day.
L
LoveKnights
09-06-2023, 01:38 PM #16

Thank you for your feedback. I'll keep them in mind. Have a great day.

O
OmqDace
Posting Freak
798
09-28-2023, 01:34 PM
#17
Purchase a fresh motherboard, take lessons from your errors, and avoid vacuuming it again—there’s a chance you might have harmed or dislodged some tiny SMD components.
O
OmqDace
09-28-2023, 01:34 PM #17

Purchase a fresh motherboard, take lessons from your errors, and avoid vacuuming it again—there’s a chance you might have harmed or dislodged some tiny SMD components.

N
NextSonic
Member
85
10-18-2023, 12:58 AM
#18
I fixed a few bent pins on the Maximus VII Hero motherboard I talked about, and it functioned properly. The main issue now is the absence of a display on the screen, which I suspect is connected to the RAM.
N
NextSonic
10-18-2023, 12:58 AM #18

I fixed a few bent pins on the Maximus VII Hero motherboard I talked about, and it functioned properly. The main issue now is the absence of a display on the screen, which I suspect is connected to the RAM.

S
snuttisnutti
Member
206
10-18-2023, 04:32 AM
#19
Do you have any extra memory available for testing?
S
snuttisnutti
10-18-2023, 04:32 AM #19

Do you have any extra memory available for testing?

X
Xo_PVP_Girl_oX
Senior Member
500
10-18-2023, 05:50 AM
#20
I have two rams and I'm seeing error code 76. I don't know what it means.
X
Xo_PVP_Girl_oX
10-18-2023, 05:50 AM #20

I have two rams and I'm seeing error code 76. I don't know what it means.

Pages (3): Previous 1 2 3 Next