overclocking issues on 290x
overclocking issues on 290x
I recently tried to overclock my 290x matrix platinum, but quickly realized GPUTWEAK won’t help. The app crashes or locks the GPU at 300Mhz.
I’m considering using MSI afterburner, though it doesn’t manage voltage properly.
After some research, I found this guide that offers useful tips.
I obtained my I2CD data and discovered something on bus 6 Probing device 29...
Invalid device
Probing device 2a...
Invalid device
Probing device 2b...
Invalid device
Probing device 2c...
00 00 00 00 00 00 00 00 00 00 10 03 00 00 02 01 00
00 00 00 00 00 00 00 00 00 00 00 02 10 74 04 20 01
00 51 56 5A 42 75 4D 4A 00 00 00 00 00 00 00
00 00 00 03 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 33 2E 40 01 00 00 01 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
02 04 00 00 00 00 00 40 01 00 00 00 00 02 01 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Probing device 2d...
I added data to the VEN_1002&DEV... file, which seemed to help.
Please let me know if this approach works or if you have another method in mind!
have you experimented with amd overdrive? just shift the dot to a higher frequency and power limit and see how it works. move the dot gradually increasing the clock speed percentage until it becomes unstable, then raise the power slightly until it stabilizes again. repeat this process until you reach the desired overclocking level.
have you experimented with amd overdrive? just shift the dot to a higher frequency and power limit and see how it works. move the dot gradually increasing the clock speed percentage until it becomes unstable, then raise the power slightly until it stabilizes again. repeat this process until you reach the oci you desire.