Operating at 2133 MHz, expected speed is 3200.
Operating at 2133 MHz, expected speed is 3200.
The issue involves RAM not operating at full capacity, with the BIOS setting it to a default speed of 2133. I attempted adjusting the speed but encountered POST failures. The system runs on a Corsair Vengeance LPX 32 GB 2x16 3200 MHz motherboard from ASUS TUF GAMING B450-PLUS II.
It seems unclear what you're referring to. If it's about specifications or standards, one component meets XMP version 1 while another complies with JEDEC standards. The XMP version works at 3200 MHz, whereas the JEDEC version operates at 2133.
XMP ensures optimal performance at its maximum capacity. Can you adjust settings to prioritize XMP or D.O.C.P. if available?
Check the list of available slots and look for an entry labeled XMP #2. If it appears but isn't active, you can identify it by its number.
If the second stick is placed in slot 4 (the correct position), turn on XMP for that slot.
Confirm your RAM is installed in slots 2 and 4. Turn on XMP support. If you encounter issues, proceed manually. You can find helpful videos online for guidance. For future reference, verify the motherboard's specifications to ensure compatibility.