Only USB 2.0 is detected on USB 3 ports.

Pages (2): 1 2 Next

EpicSoulDE
Junior Member

03-14-2019, 08:12 AM

EpicSoulDE

03-14-2019, 08:12 AM #1

Ayella
Member

165

03-14-2019, 08:18 AM

Checked that the USB 3.0 cables are connected to the correct USB 3.0 ports on the motherboard.

Ayella

03-14-2019, 08:18 AM #2

Checked that the USB 3.0 cables are connected to the correct USB 3.0 ports on the motherboard.

jonleflar
Member

181

03-14-2019, 10:13 AM

Hi Perrin, glad you got the answer. My front panel works fine and I'm currently using the rear USB 3 ports on the MOBO.

jonleflar

03-14-2019, 10:13 AM #3

Hi Perrin, glad you got the answer. My front panel works fine and I'm currently using the rear USB 3 ports on the MOBO.

Lewky_
Member

03-18-2019, 12:39 PM

Possibly useless and might be wrong but I have a few thoughts anyway: There are multiple sections of the USB chain. There’s the motherboard header, the cable between the motherboard and case header, the cable between the machine and the object, and there’s the object. It’s not impossible I suppose that having one of these devices as USB2 could possibly force the entire system to default to USB2. Stupid, but not necessarily impossible. It might also be a setting somewhere.

Lewky_

03-18-2019, 12:39 PM #4

kechum123
Member

03-24-2019, 09:49 AM

That would really mess things up, wouldn't it? I'm curious about what would happen if I turned off the front USB ports just to test it out. Right now I'm not using them.

kechum123

03-24-2019, 09:49 AM #5

That would really mess things up, wouldn't it? I'm curious about what would happen if I turned off the front USB ports just to test it out. Right now I'm not using them.

DerpyBat
Member

124

03-24-2019, 10:30 AM

I’d check everything carefully and look for USB2.0 cables specifically.

DerpyBat

03-24-2019, 10:30 AM #6

I’d check everything carefully and look for USB2.0 cables specifically.

Destroyer1091
Junior Member

03-26-2019, 11:15 AM

Great, I'll give it a shot and let you know how it goes. Thanks again!

Destroyer1091

03-26-2019, 11:15 AM #7

Great, I'll give it a shot and let you know how it goes. Thanks again!

TrueRiven
Member

03-26-2019, 12:27 PM

Hmm, maybe not. There are also options. One annoying part is it could be a setting you never adjusted on your own. Just hooking something in could switch it on by default.

TrueRiven

03-26-2019, 12:27 PM #8

Hmm, maybe not. There are also options. One annoying part is it could be a setting you never adjusted on your own. Just hooking something in could switch it on by default.

ScHottie
Member

03-26-2019, 02:24 PM

Sadly, it didn't make a difference

ScHottie

03-26-2019, 02:24 PM #9

Sadly, it didn't make a difference

darkspeed002
Member

143

03-26-2019, 03:06 PM

#10

Use a USB 3.0 port and a corresponding USB 3.0 cable. Refer to their troubleshooting guide: the included charging cable is USB 2, which isn't compatible with Oculus Link's requirements for a USB 3 cable that supports both power and data transfer.

darkspeed002

03-26-2019, 03:06 PM #10

Pages (2): 1 2 Next