No nuevo PC se está instalando.

Pages (2): 1 2 Next

MitiaNova
Junior Member

04-09-2023, 02:02 AM

I assembled a new computer, but it didn’t start up at all. I checked everything was connected correctly and even reinserted the CPU, though I’m a bit concerned the hardware might be faulty. Anyone have any suggestions?

MitiaNova

04-09-2023, 02:02 AM #1

iKegreenS_
Posting Freak

878

04-09-2023, 06:09 AM

The parts inside the computer include the processor, memory, storage devices, graphics card, and input/output ports. For a Ryzen 5xxx CPU, ensure your BIOS is up to date.

iKegreenS_

04-09-2023, 06:09 AM #2

The parts inside the computer include the processor, memory, storage devices, graphics card, and input/output ports. For a Ryzen 5xxx CPU, ensure your BIOS is up to date.

Gillious
Member

166

04-09-2023, 12:53 PM

Gigabyte Z690 gaming setup with Intel 12700k Superflower 1000W, 80+ titanium, Asus TUF RTX 3070ti, Corsair Dominator 3200. Verified CPU isn’t overheating at all.

Gillious

04-09-2023, 12:53 PM #3

Gigabyte Z690 gaming setup with Intel 12700k Superflower 1000W, 80+ titanium, Asus TUF RTX 3070ti, Corsair Dominator 3200. Verified CPU isn’t overheating at all.

BM0_M1NECRAFT
Member

156

04-09-2023, 01:03 PM

Ensure the 8-pin EPS power connector is securely connected at the top left of the motherboard. After powering on, observe if any activity occurs or if the system responds.

BM0_M1NECRAFT

04-09-2023, 01:03 PM #4

Ensure the 8-pin EPS power connector is securely connected at the top left of the motherboard. After powering on, observe if any activity occurs or if the system responds.

TrekYT
Junior Member

04-16-2023, 10:07 PM

Everything is connected safely, but the GPU and RAM are active while the motherboard RGB stays off, except for the post light that doesn’t reach the CPU’s first stage.

TrekYT

04-16-2023, 10:07 PM #5

Everything is connected safely, but the GPU and RAM are active while the motherboard RGB stays off, except for the post light that doesn’t reach the CPU’s first stage.

Supercow160
Member

04-16-2023, 11:32 PM

Initiate system start from outside the chassis. Begin boot process.

Supercow160

04-16-2023, 11:32 PM #6

Initiate system start from outside the chassis. Begin boot process.

maisymoon
Member

223

04-17-2023, 01:27 PM

Topic redirected to troubleshooting section.

maisymoon

04-17-2023, 01:27 PM #7

Topic redirected to troubleshooting section.

_Azrod_
Member

04-18-2023, 08:42 AM

No post appears yet and the CPU remains unresponsive during uploads. It doesn’t transition smoothly between CPU and RAM, and the chip stays cool—suggesting it isn’t receiving power properly.

_Azrod_

04-18-2023, 08:42 AM #8

No post appears yet and the CPU remains unresponsive during uploads. It doesn’t transition smoothly between CPU and RAM, and the chip stays cool—suggesting it isn’t receiving power properly.

iPhan
Member

183

04-26-2023, 12:08 AM

I've tested both 8 and 12 pin connections, but they're not providing any power to the CPU.

iPhan

04-26-2023, 12:08 AM #9

I've tested both 8 and 12 pin connections, but they're not providing any power to the CPU.

BlockBoss360
Member

102

04-26-2023, 01:41 AM

#10

Removed the GPU from the process.

BlockBoss360

04-26-2023, 01:41 AM #10

Removed the GPU from the process.

Pages (2): 1 2 Next