F5F Stay Refreshed Power Users Overclocking Nickel and Brass reaction?

Nickel and Brass reaction?

Nickel and Brass reaction?

Pages (2): 1 2 Next
R
RejectedKid
Junior Member
39
03-10-2016, 08:13 PM
#1
I just placed an order for a metric ton of water-cooling components and am checking if the nickel-plated blocks might interact with the brass tubing in my radiator. This will help decide if I need to add any anti-corrosion measures. Any advice would be greatly appreciated!
R
RejectedKid
03-10-2016, 08:13 PM #1

I just placed an order for a metric ton of water-cooling components and am checking if the nickel-plated blocks might interact with the brass tubing in my radiator. This will help decide if I need to add any anti-corrosion measures. Any advice would be greatly appreciated!

T
TheRealShrub
Senior Member
409
03-15-2016, 12:20 AM
#2
The referenced page explains galvanic corrosion.
T
TheRealShrub
03-15-2016, 12:20 AM #2

The referenced page explains galvanic corrosion.

W
wart666
Junior Member
33
03-15-2016, 01:40 AM
#3
The referenced page explains galvanic corrosion.
W
wart666
03-15-2016, 01:40 AM #3

The referenced page explains galvanic corrosion.

W
wdupuy71
Member
170
03-18-2016, 03:01 PM
#4
I just read a detailed piece about Tom's claim that the situation will corrode gradually since the metals are closely positioned on the galvanic scale. He mentioned using distilled water in the loop. This made me think about ways to slow down the corrosion further. The article suggested some anti-freeze products with anti-corrosion benefits, but I was curious about where to purchase them and any potential downsides of adding them. Do you know of any anti-corrosion additives that won’t change the fluid’s color (like the anti-algae ones)?
W
wdupuy71
03-18-2016, 03:01 PM #4

I just read a detailed piece about Tom's claim that the situation will corrode gradually since the metals are closely positioned on the galvanic scale. He mentioned using distilled water in the loop. This made me think about ways to slow down the corrosion further. The article suggested some anti-freeze products with anti-corrosion benefits, but I was curious about where to purchase them and any potential downsides of adding them. Do you know of any anti-corrosion additives that won’t change the fluid’s color (like the anti-algae ones)?

S
Skutz_Creeper
Junior Member
41
03-23-2016, 05:19 PM
#5
Brass and nickel in a loop work well; avoid using aluminum when pairing it with nickel, brass, and copper.
S
Skutz_Creeper
03-23-2016, 05:19 PM #5

Brass and nickel in a loop work well; avoid using aluminum when pairing it with nickel, brass, and copper.

C
ChibiWolf39
Senior Member
491
03-29-2016, 12:59 AM
#6
I'm checking this myself and I'm currently using a blend consisting of 3% water wetter 97% distilled water and 3 drops of HTH super extended algae guard added every two months, with the entire system being flushed or filled every six months. I'm not sure if it's effective yet since it's only been two months, but I've used water wetter 3% antifreeze 17% distilled water for years. The only problem I've noticed is that temperatures are a couple of degrees higher and the tubing turns green. You can review my build here if you'd like—it explains a lot about the process I went through.
C
ChibiWolf39
03-29-2016, 12:59 AM #6

I'm checking this myself and I'm currently using a blend consisting of 3% water wetter 97% distilled water and 3 drops of HTH super extended algae guard added every two months, with the entire system being flushed or filled every six months. I'm not sure if it's effective yet since it's only been two months, but I've used water wetter 3% antifreeze 17% distilled water for years. The only problem I've noticed is that temperatures are a couple of degrees higher and the tubing turns green. You can review my build here if you'd like—it explains a lot about the process I went through.

S
Sven_Weetj
Member
220
03-30-2016, 09:14 PM
#7
Brass and nickel in a loop are acceptable, but avoid using aluminum with nickel, brass, and copper. Do you have any way to check for actual galvanic corrosion or buildup? Is it mainly based on what you see, or do temperature changes play a role?
S
Sven_Weetj
03-30-2016, 09:14 PM #7

Brass and nickel in a loop are acceptable, but avoid using aluminum with nickel, brass, and copper. Do you have any way to check for actual galvanic corrosion or buildup? Is it mainly based on what you see, or do temperature changes play a role?

F
Firasko
Junior Member
10
04-04-2016, 12:36 AM
#8
I understand you didn't ask directly, but the response is generally between 3 to 6 months, though it might happen faster under the right circumstances, similar to inserting a metal bar into a bucket of water.
F
Firasko
04-04-2016, 12:36 AM #8

I understand you didn't ask directly, but the response is generally between 3 to 6 months, though it might happen faster under the right circumstances, similar to inserting a metal bar into a bucket of water.

B
Bakugan510
Junior Member
13
04-04-2016, 06:36 AM
#9
I investigated it and believe I should continue using simple distilled water with some pure silver G1/4 plugs for algae, and perform a drain/fill cycle every six months.
You can find more info here: http://www.frozencpu.com/products/15814/...mv_pc=4731
B
Bakugan510
04-04-2016, 06:36 AM #9

I investigated it and believe I should continue using simple distilled water with some pure silver G1/4 plugs for algae, and perform a drain/fill cycle every six months.
You can find more info here: http://www.frozencpu.com/products/15814/...mv_pc=4731

K
KarmaNoob
Junior Member
49
04-04-2016, 11:01 AM
#10
It seems interesting, and they should function similarly to a kill coil. Although I haven't used them before, many people have tried them and reported positive results. This should perform just as expected.
K
KarmaNoob
04-04-2016, 11:01 AM #10

It seems interesting, and they should function similarly to a kill coil. Although I haven't used them before, many people have tried them and reported positive results. This should perform just as expected.

Pages (2): 1 2 Next