New RAM installed, but it's unclear if it's functioning properly.
New RAM installed, but it's unclear if it's functioning properly.
I purchased this RAM module, but it seems to not function properly. It fits the case, and the documentation claims compatibility with my CPU, yet when I attempt to boot, it just stalls on startup. I’m unsure if there’s an issue with my BIOS settings or something else. Your setup is listed here: https://pcpartpicker.com/list/dffzh3. Any advice would be greatly appreciated.
do you possess your earlier rams? if they function then it means you have defective rams and should replace them, otherwise the board should be cleared as it appears to have failed on you jedec 3200c22 isn't expected to encounter problems because of no xmp and those are micron chips 16gbit rev b/e decent chips for ddr4 capable of over 5000 with e not being optimal but i anticipate at least half decent (~4600). both should already support bios since 16gbit chips have been available for some time, though if you have an especially old bios it might be wise to upgrade before replacing rams check if that improves performance
Is this part being added to your current RAM set? If yes, reset the CMOS and power off docp. Running four sticks at 3600x can be risky. It might seem like a quick fix, but I’m not suggesting an RMA without checking first.
I'll check for other factors first before proceeding. It seems I'm more likely to point fingers at the motherboard if it isn't the RAM, given the 40+ boards I've purchased and the various odd problems I've encountered (random restarts, post issues from dirt, complete failure, VRMs blowing up twice, etc.). Since having no or dead storage won't stop the issue and CPU/PSU are usually stable, if it were the GPU that's the problem, it would likely be damaged or wouldn't power on at all. The cooler is just a metal casing, which makes troubleshooting straightforward with known working parts.
Avoid installing it again. The last setup used 2x16, but I faced RAM problems while playing WoW and browsing, so I bought a new one. Would you consider reinstalling and resetting the CMOS? (I also reinstalled the previous version, which functioned just like before.)
Starting here, we see the combination of RAM, employing four sticks on a setup that traditionally faces issues and has an unclear history regarding BIOS...
Yes, this could be a solid beginning. If it works with the existing RAM, it might mean the new RAM isn't functioning properly. How long do you allow it to rest while hanging? Training time for RAM can vary.
not noted but you probably overlooked that. put your old unit on the board to test—see how it performs. if it works, rm the Rams; they seem clearly defective. could you share the details of your previous model?
The old RAM plays a key role as ballistic sticks. 2x16GB Ah, just recalled; when I install the new RAM into a white LED it lights up on my motherboard. I can’t see it clearly, but with the old RAM inside it doesn’t stay active like it does with the new one.