F5F Stay Refreshed Hardware Desktop Need tips for G.skill Ripjaws5 3200 cl16? Here are some helpful details!

Need tips for G.skill Ripjaws5 3200 cl16? Here are some helpful details!

Need tips for G.skill Ripjaws5 3200 cl16? Here are some helpful details!

W
walee123
Senior Member
737
09-26-2021, 11:37 AM
#1
Good morning everyone. I've been experimenting with my son's HP Pavilion Tg01-0018 RAM timings. He got a 2×8 (16GB) 3200 CL16,18,18,38,56 set from Ripjaws 5 Hynix CJR RAM kit. Obviously the Pavillions motherboard is an Erica2 (8643) brand, proprietary. I've tried various settings to lower the case to 16, but it keeps crashing with black screens and forces a CMOS reset. Right now it's stuck at cl18,17,19,18,34,54 and I've adjusted all secondary timings. I'm not an expert, so anyone have any advice on why I can't get the latency to 16? Could it be the motherboard, the CPU (Ryzen 5 3500), or something I'm doing wrong? I don't have any useful info about the motherboard, so please help me out. Thanks in advance.
W
walee123
09-26-2021, 11:37 AM #1

Good morning everyone. I've been experimenting with my son's HP Pavilion Tg01-0018 RAM timings. He got a 2×8 (16GB) 3200 CL16,18,18,38,56 set from Ripjaws 5 Hynix CJR RAM kit. Obviously the Pavillions motherboard is an Erica2 (8643) brand, proprietary. I've tried various settings to lower the case to 16, but it keeps crashing with black screens and forces a CMOS reset. Right now it's stuck at cl18,17,19,18,34,54 and I've adjusted all secondary timings. I'm not an expert, so anyone have any advice on why I can't get the latency to 16? Could it be the motherboard, the CPU (Ryzen 5 3500), or something I'm doing wrong? I don't have any useful info about the motherboard, so please help me out. Thanks in advance.

A
AlphaMale_
Member
62
09-28-2021, 09:26 PM
#2
It might be your CPU and the motherboard. I'm still stuck at 18°CAS, even after many attempts to assist. When it finally booted, my voltage was 1.45 and there were over 200 errors. I guess they'll be satisfied with the performance anyway.
A
AlphaMale_
09-28-2021, 09:26 PM #2

It might be your CPU and the motherboard. I'm still stuck at 18°CAS, even after many attempts to assist. When it finally booted, my voltage was 1.45 and there were over 200 errors. I guess they'll be satisfied with the performance anyway.

O
Oreos_In_Cream
Member
162
10-03-2021, 12:06 AM
#3
Yeah, I think your right. I think it's the motherboard but it could also be the processor. Also it may be possible that the ram won't even run at the cas# assigned. My son could care less but I just like to get the performance I paid for. Thanks for the input.
O
Oreos_In_Cream
10-03-2021, 12:06 AM #3

Yeah, I think your right. I think it's the motherboard but it could also be the processor. Also it may be possible that the ram won't even run at the cas# assigned. My son could care less but I just like to get the performance I paid for. Thanks for the input.

C
coolman348
Member
199
10-04-2021, 08:03 AM
#4
The actual voltage for RAM is determined by the motherboard specifications, not just the HP MBs.
C
coolman348
10-04-2021, 08:03 AM #4

The actual voltage for RAM is determined by the motherboard specifications, not just the HP MBs.

J
JJ1406
Junior Member
7
10-04-2021, 04:02 PM
#5
The RAM voltage is 1.2 xmp 1.35. All the info apps confirm it's enabled and supported. I've been using it at 3200mhz 1.35 for more than a year. The main issue is setting the clock below 18. I'm planning to replace my motherboard, power supply, case, and GPU. I'm tired of dealing with HP proprietary issues. Appreciate the help!
J
JJ1406
10-04-2021, 04:02 PM #5

The RAM voltage is 1.2 xmp 1.35. All the info apps confirm it's enabled and supported. I've been using it at 3200mhz 1.35 for more than a year. The main issue is setting the clock below 18. I'm planning to replace my motherboard, power supply, case, and GPU. I'm tired of dealing with HP proprietary issues. Appreciate the help!