Need help overclocking ram

WPaige
Senior Member

377

11-22-2016, 01:49 AM

Your RAM is set to run at 3200MHz as advertised, but it may not be reaching that speed due to BIOS settings or motherboard limitations. Check the BIOS options for adjusting the memory clock speed and ensure the chipset supports higher frequencies. If needed, update your BIOS to the latest version for better performance.

WPaige

11-22-2016, 01:49 AM #1

pedro_tkf
Senior Member

643

11-28-2016, 09:13 PM

Press BIOS during startup, then navigate to the overclocking section in advanced settings. Displayed memory speed should be adjusted to 3200. Confirm all timing values are accurate.

pedro_tkf

11-28-2016, 09:13 PM #2

Press BIOS during startup, then navigate to the overclocking section in advanced settings. Displayed memory speed should be adjusted to 3200. Confirm all timing values are accurate.

Yaubarry
Member

204

12-05-2016, 01:15 AM

In the BIOS, the first info page shows a DDR4 speed of 3000 MHz, but the packaging and label on the RAM indicate 3200 MHz. Could there be an issue?

Yaubarry

12-05-2016, 01:15 AM #3

In the BIOS, the first info page shows a DDR4 speed of 3000 MHz, but the packaging and label on the RAM indicate 3200 MHz. Could there be an issue?

UnPetitPoney_
Member

12-05-2016, 02:12 AM

That's the automatic suggestion it made. Click advanced, then overclocking, and you'll find a dropdown for frequency selection.

UnPetitPoney_

12-05-2016, 02:12 AM #4

That's the automatic suggestion it made. Click advanced, then overclocking, and you'll find a dropdown for frequency selection.

RekVII
Junior Member

12-05-2016, 09:29 AM

The right timing depends on what you're doing, but start with a gentle pace and adjust as you get more comfortable.

RekVII

12-05-2016, 09:29 AM #5

The right timing depends on what you're doing, but start with a gentle pace and adjust as you get more comfortable.

Waddos
Member

157

12-05-2016, 10:04 AM

Your kit is 16-18-36.

Waddos

12-05-2016, 10:04 AM #6

Your kit is 16-18-36.

FadeD_AwaY
Junior Member

12-06-2016, 11:59 PM

Under the advanced tab, select XMP or DOCP

FadeD_AwaY

12-06-2016, 11:59 PM #7

Under the advanced tab, select XMP or DOCP