Need assistance with SetFSB?
I'm not aware of any specific voltage increase software, such as Intel XTU.
I don't. You might try a pin mod or similar option.
Regardless of the situation, after setting up Intel XTU my overclock remains stable during restarts.
Yes, this appears to be the correct PLL datasheet.
File named M137.5MHz.bmp
Yes, it aligns with the number on the PLL chip on the motherboard.
It appears to function correctly.
This feature limits the display to just four clock cycles before stopping.
However, the correct entry from the ICS chip isn't included in SetFSB.
Yes, there are two IC PLL chips on the board as mentioned.