F5F Stay Refreshed Hardware Desktop Need assistance with 5900x?

Need assistance with 5900x?

Need assistance with 5900x?

Pages (2): 1 2 Next
M
MaxIsTriggred
Member
110
07-28-2020, 07:28 PM
#1
I recently moved to an AMD build: 5900x Aorus x570 master G.skill Trident 32g (2 2x8) 4000mhz kit Asus 3070 dual 8g SS 750w psu H150i capellix 011 dynamic case with 9 unifan. Fan and cooling setup: Aio top push/pull exhaust, bottom/side intake. Issue: Unstable performance. I’ve tried PBO CO with negative offset at 20% but it’s unstable. Used AMD Master, then Creator, then auto OC – it worked for a few hours, even 15 minutes of Prime95. I have an MC 22104 but crashes during gaming with titles like PUBG, Apex, Underlords, Dota (especially at low settings). At idle I see 49-60°C, load up to 93°C. During gaming it drops to 49-55°C at 91% load, fans still kick in. Any advice? Lower temps with solid MHz and quieter build? Thanks! (From the Philippines)
M
MaxIsTriggred
07-28-2020, 07:28 PM #1

I recently moved to an AMD build: 5900x Aorus x570 master G.skill Trident 32g (2 2x8) 4000mhz kit Asus 3070 dual 8g SS 750w psu H150i capellix 011 dynamic case with 9 unifan. Fan and cooling setup: Aio top push/pull exhaust, bottom/side intake. Issue: Unstable performance. I’ve tried PBO CO with negative offset at 20% but it’s unstable. Used AMD Master, then Creator, then auto OC – it worked for a few hours, even 15 minutes of Prime95. I have an MC 22104 but crashes during gaming with titles like PUBG, Apex, Underlords, Dota (especially at low settings). At idle I see 49-60°C, load up to 93°C. During gaming it drops to 49-55°C at 91% load, fans still kick in. Any advice? Lower temps with solid MHz and quieter build? Thanks! (From the Philippines)

S
Sveiv
Member
116
08-04-2020, 05:00 AM
#2
Does it cause a blue screen or just a blackout? Your infinity fabric clock should hit 2000mhz. You’d need to run RAM and IF clocks in sync, meaning 4000mhz DDR RAM speed should target 2000mhz on the IF. If you turned on docp, that’s it. Also: is the system stable when you don’t enable OC (PBO or otherwise)?
S
Sveiv
08-04-2020, 05:00 AM #2

Does it cause a blue screen or just a blackout? Your infinity fabric clock should hit 2000mhz. You’d need to run RAM and IF clocks in sync, meaning 4000mhz DDR RAM speed should target 2000mhz on the IF. If you turned on docp, that’s it. Also: is the system stable when you don’t enable OC (PBO or otherwise)?

H
Herostare
Member
77
08-05-2020, 03:20 AM
#3
I experienced double boot, but mainly blackouts and restarts. Occasionally freeze or crash, though windows remain unaffected. I believe setting the frequency to 2000mhz is necessary. I’ll verify that. I’m currently on duty. I expect most help will arrive soon, allowing me to implement the changes. Any further advice? I’m quite concerned about my idle temperatures—are they truly that high?
H
Herostare
08-05-2020, 03:20 AM #3

I experienced double boot, but mainly blackouts and restarts. Occasionally freeze or crash, though windows remain unaffected. I believe setting the frequency to 2000mhz is necessary. I’ll verify that. I’m currently on duty. I expect most help will arrive soon, allowing me to implement the changes. Any further advice? I’m quite concerned about my idle temperatures—are they truly that high?

S
Suriel02
Member
73
08-12-2020, 01:15 AM
#4
Yes, it is stable in the stock configuration.
S
Suriel02
08-12-2020, 01:15 AM #4

Yes, it is stable in the stock configuration.

A
asvv123456
Junior Member
4
08-16-2020, 12:53 PM
#5
Those high idle temperatures are typical for the Ryzen 5000. Did you turn on PBO when they occurred?
A
asvv123456
08-16-2020, 12:53 PM #5

Those high idle temperatures are typical for the Ryzen 5000. Did you turn on PBO when they occurred?

T
TimmyCHI
Member
65
08-18-2020, 08:10 AM
#6
I'm really uncertain about this. I plan to try again tomorrow, though I recall experiencing blackouts a couple of times.
T
TimmyCHI
08-18-2020, 08:10 AM #6

I'm really uncertain about this. I plan to try again tomorrow, though I recall experiencing blackouts a couple of times.

N
nikmich321
Junior Member
23
08-18-2020, 04:29 PM
#7
I've seen that too. What are the standard settings? My readings seem high. It might be because I'm in ph... plus, the fans get more active when I switch to balanced/pwm mode. Setting it to quiet makes it less stable...
N
nikmich321
08-18-2020, 04:29 PM #7

I've seen that too. What are the standard settings? My readings seem high. It might be because I'm in ph... plus, the fans get more active when I switch to balanced/pwm mode. Setting it to quiet makes it less stable...

_
_Hustle_
Junior Member
46
08-18-2020, 04:46 PM
#8
Cooling matters. Is the memory running the XMP 4000 profile or another setting?
_
_Hustle_
08-18-2020, 04:46 PM #8

Cooling matters. Is the memory running the XMP 4000 profile or another setting?

J
JustWaffle
Member
63
08-19-2020, 12:22 AM
#9
My room temperatures are currently being monitored.
J
JustWaffle
08-19-2020, 12:22 AM #9

My room temperatures are currently being monitored.

V
Vexodius
Junior Member
6
08-20-2020, 10:02 PM
#10
It would be great if someone could explain or share their approach. I’m really unsure about this platform, sorry for the confusion.
V
Vexodius
08-20-2020, 10:02 PM #10

It would be great if someone could explain or share their approach. I’m really unsure about this platform, sorry for the confusion.

Pages (2): 1 2 Next