F5F Stay Refreshed Hardware Desktop Need assistance figuring out if CPU or motherboard is the issue? Let's check together.

Need assistance figuring out if CPU or motherboard is the issue? Let's check together.

Need assistance figuring out if CPU or motherboard is the issue? Let's check together.

Pages (3): 1 2 3 Next
S
SpiritClaws
Member
217
05-04-2024, 01:51 PM
#1
It seems there might be an issue with either the motherboard or CPU memory control component. Your RAM sticks (two 8GB) are functioning correctly when installed in slot B1, but they only work in slot A1. It’s possible you damaged your motherboard RAM slots during installation. The BIOS is set to BSOD and has been worsening until the PC stopped turning on after moving RAM from slot A1 to B1. Dual channel in B1 and B2 isn’t working either. You may want to check the motherboard for any physical damage or incorrect placement before deciding whether to replace the CPU or motherboard.
S
SpiritClaws
05-04-2024, 01:51 PM #1

It seems there might be an issue with either the motherboard or CPU memory control component. Your RAM sticks (two 8GB) are functioning correctly when installed in slot B1, but they only work in slot A1. It’s possible you damaged your motherboard RAM slots during installation. The BIOS is set to BSOD and has been worsening until the PC stopped turning on after moving RAM from slot A1 to B1. Dual channel in B1 and B2 isn’t working either. You may want to check the motherboard for any physical damage or incorrect placement before deciding whether to replace the CPU or motherboard.

R
Reflex_7
Junior Member
16
05-04-2024, 03:06 PM
#2
Check if XMP is active. If so, reset BIOS to its default settings and attempt the process again with slots B1 and B2 set to 2 and 4.
R
Reflex_7
05-04-2024, 03:06 PM #2

Check if XMP is active. If so, reset BIOS to its default settings and attempt the process again with slots B1 and B2 set to 2 and 4.

O
oHits
Member
176
05-06-2024, 07:56 AM
#3
Ensure CMOS is cleared before placing the memory in slots A2 and B2. These are the proper locations.
O
oHits
05-06-2024, 07:56 AM #3

Ensure CMOS is cleared before placing the memory in slots A2 and B2. These are the proper locations.

R
Rosie_The_Fox
Member
213
05-06-2024, 08:42 AM
#4
I frequently reinitialized the BIOS, testing it numerous times. XMP was turned off, but eventually someone suggested using a single RAM stick to unlock XMP support, which likely wasn’t the issue.
R
Rosie_The_Fox
05-06-2024, 08:42 AM #4

I frequently reinitialized the BIOS, testing it numerous times. XMP was turned off, but eventually someone suggested using a single RAM stick to unlock XMP support, which likely wasn’t the issue.

T
tristan42
Member
109
05-06-2024, 12:36 PM
#5
A2 and B2 might actually fit the role, even though it seems unusual. I’m not sure, but I’ll give it a shot.
T
tristan42
05-06-2024, 12:36 PM #5

A2 and B2 might actually fit the role, even though it seems unusual. I’m not sure, but I’ll give it a shot.

M
MutantJambon
Junior Member
34
05-06-2024, 02:12 PM
#6
Slots 2 and 4 should be considered starting from the CPU position.
M
MutantJambon
05-06-2024, 02:12 PM #6

Slots 2 and 4 should be considered starting from the CPU position.

G
gunner59590
Junior Member
39
05-09-2024, 06:15 PM
#7
They're paired up already, so I've checked slots 1-3 and 2-4 again.
G
gunner59590
05-09-2024, 06:15 PM #7

They're paired up already, so I've checked slots 1-3 and 2-4 again.

E
Ender_Craft47
Posting Freak
866
05-10-2024, 01:01 PM
#8
Follow the instructions in the manual carefully.
E
Ender_Craft47
05-10-2024, 01:01 PM #8

Follow the instructions in the manual carefully.

M
MettaloCaft
Senior Member
396
05-17-2024, 08:16 PM
#9
I'll give it a shot, we'll check it out. I'm planning to respond from my phone later.
M
MettaloCaft
05-17-2024, 08:16 PM #9

I'll give it a shot, we'll check it out. I'm planning to respond from my phone later.

N
natsu40
Member
239
05-18-2024, 03:02 AM
#10
A2 and B2 correspond to slots 2 and 4 according to the manual.
N
natsu40
05-18-2024, 03:02 AM #10

A2 and B2 correspond to slots 2 and 4 according to the manual.

Pages (3): 1 2 3 Next