Modify the Wi-Fi access point name and password.
Modify the Wi-Fi access point name and password.
I've invested a lot of time searching and adjusting settings, unplugging devices, modifying connections, but progress remains slow. My issue: I need to modify the SSID and password of my Wi-Fi access point (currently no password means open network). My configuration: a BT home hub 3 at one end of my house, providing Wi-Fi to most devices, then an Ethernet cable connects it to the other end. From there, a TP-Link switch splits the connection, giving me an Ethernet link to my PC and another to the Wi-Fi access point (see this link: https://www.ebay.co.uk/p/Laptone-LNP2603...3558485689). This setup ensures my PS4, switch, phone, etc., receive strong Wi-Fi signals. My access point is currently labeled "WIFI AP" with no password, which works well except for two points: 1) anyone can connect to my network, and 2) I’d like the same SSID and password as the router for smooth device switching (especially for my Google Home speakers). I can access my home hub via http://192.168.1.254/ as expected, but I can’t find equivalent settings for the Wi-Fi access point. Any suggestions on how to adjust this?
Have you checked the device’s IP address? (Check your router’s DHCP list to locate it, or if it’s static, it should be listed on the unit) I haven’t searched, but if you purchased a generic Chinese model as described, finding a manual might be tough. One of the eBay reviews mentions video guides—those could be useful. The post claims it supports WPA2, but does that match the model you own?
You mentioned "ui" but didn't specify which one. Could you clarify the interface or application you're referring to?
The device has displayed the default IP address 192.168.10.1, but nothing appears to be changing there. There are three entries in the DHCP table—my phone, two desktops—but none of the assigned IPs seem to work. The access point I’m using matches the listed one, yet it’s no longer available.
Link your computer to the AP via your switch, then disconnect all other devices. Navigate to your Ethernet adapter settings and adjust your IPv4 address to a range starting with 192.168.10. This should allow you to connect to the AP. After that, disable DHCP and assign a static IP within 192.168.1.x. Once configured, you can reconnect your PC to the normal network using its new IP address.