F5F Stay Refreshed Hardware Desktop Memory errors

Memory errors

Memory errors

Pages (2): 1 2 Next
H
HeyitsClay
Junior Member
10
02-09-2018, 02:53 PM
#1
Hey! I started assembling the PC about four days ago and have been facing some issues lately. There have been several BSODs, game crashes, and problems with the Radeon Adrenalin drivers. In just two days I experienced six BSODs, plus around fifteen random program crashes. The crashes often led to screen glitches, which made it hard to read the error messages. I ran memory tests and Memtest86+, but they all showed errors. At first I thought the CPU’s Performance Curve Optimizer setting at -20 might be causing instability. For the second test, I left it on AUTO while running Memtest86+, and the number of errors jumped from about five in under an hour to 1500 in just one minute. It’s unclear whether the issue is with the memory or the CPU. I’m not sure what to do next—leaving the optimizer auto would prevent me from booting at all, instead it crashes and reports a Windows driver error, telling me to repair Windows. My system specs are: RAM – 2x16GB Corsair Vengeance RGB DDR5-6000MHz; CPU – Ryzen 5 7600X; Motherboard – Asus TUF B650-PLUS WiFi; BIOS – 1616 (latest non-beta); GPU – XFX Speedster MERC319 RX 6950XT. Thanks!
H
HeyitsClay
02-09-2018, 02:53 PM #1

Hey! I started assembling the PC about four days ago and have been facing some issues lately. There have been several BSODs, game crashes, and problems with the Radeon Adrenalin drivers. In just two days I experienced six BSODs, plus around fifteen random program crashes. The crashes often led to screen glitches, which made it hard to read the error messages. I ran memory tests and Memtest86+, but they all showed errors. At first I thought the CPU’s Performance Curve Optimizer setting at -20 might be causing instability. For the second test, I left it on AUTO while running Memtest86+, and the number of errors jumped from about five in under an hour to 1500 in just one minute. It’s unclear whether the issue is with the memory or the CPU. I’m not sure what to do next—leaving the optimizer auto would prevent me from booting at all, instead it crashes and reports a Windows driver error, telling me to repair Windows. My system specs are: RAM – 2x16GB Corsair Vengeance RGB DDR5-6000MHz; CPU – Ryzen 5 7600X; Motherboard – Asus TUF B650-PLUS WiFi; BIOS – 1616 (latest non-beta); GPU – XFX Speedster MERC319 RX 6950XT. Thanks!

A
Aimone
Member
73
02-09-2018, 02:53 PM
#2
If EXPO/XMP is active, attempt to disable it and observe if issues resolve. It could indicate compatibility problems between RAM and motherboard/CPU at increased speeds.
A
Aimone
02-09-2018, 02:53 PM #2

If EXPO/XMP is active, attempt to disable it and observe if issues resolve. It could indicate compatibility problems between RAM and motherboard/CPU at increased speeds.

E
EvilDrone0800
Junior Member
10
02-09-2018, 02:53 PM
#3
Using just one stick passes all tests smoothly when EXPO is active, but adding two might impact stability with EXPO.
E
EvilDrone0800
02-09-2018, 02:53 PM #3

Using just one stick passes all tests smoothly when EXPO is active, but adding two might impact stability with EXPO.

N
Nick65633
Junior Member
12
02-09-2018, 02:53 PM
#4
They might fit better if placed in the correct positions. Which ones do you mean?
N
Nick65633
02-09-2018, 02:53 PM #4

They might fit better if placed in the correct positions. Which ones do you mean?

G
Gabowred
Junior Member
16
02-09-2018, 02:53 PM
#5
I learned them at A2 and B2 levels.
G
Gabowred
02-09-2018, 02:53 PM #5

I learned them at A2 and B2 levels.

F
FTTank2008
Member
174
02-09-2018, 02:53 PM
#6
It should be fine. When a single stick is functioning, you might want to check by swapping it out or using it in other slots to determine if it's faulty.
F
FTTank2008
02-09-2018, 02:53 PM #6

It should be fine. When a single stick is functioning, you might want to check by swapping it out or using it in other slots to determine if it's faulty.

J
JBlueMonkey
Junior Member
49
02-09-2018, 02:53 PM
#7
I used every stick in each position separately during the Memtest86+ run with a complete pass and EXPO turned on. All tests completed successfully without any issues.
J
JBlueMonkey
02-09-2018, 02:53 PM #7

I used every stick in each position separately during the Memtest86+ run with a complete pass and EXPO turned on. All tests completed successfully without any issues.

U
UnicornCracker
Senior Member
663
02-09-2018, 02:53 PM
#8
I’m running low on ideas. Each channel is separate, so there should be no issues. If it’s related to AMD, I’ll let other users assist further.
U
UnicornCracker
02-09-2018, 02:53 PM #8

I’m running low on ideas. Each channel is separate, so there should be no issues. If it’s related to AMD, I’ll let other users assist further.

C
ClemowKings
Junior Member
5
02-09-2018, 02:53 PM
#9
Don't worry, thank you for your assistance! I've chosen to exchange the two sticks and purchase new ones from G.Skill since these are compatible with my motherboard's memory chart, whereas the Corsair ones aren't. It seems like a peculiar problem with this motherboard and the Corsair sticks. I'll share an update once they arrive and try them out.
C
ClemowKings
02-09-2018, 02:53 PM #9

Don't worry, thank you for your assistance! I've chosen to exchange the two sticks and purchase new ones from G.Skill since these are compatible with my motherboard's memory chart, whereas the Corsair ones aren't. It seems like a peculiar problem with this motherboard and the Corsair sticks. I'll share an update once they arrive and try them out.

M
MooseBubs
Junior Member
34
02-09-2018, 02:53 PM
#10
I'm waiting for your tests because i have the exact same problem with same RAM and CPU but a MSI PRO 650M-P mother board. If changing the RAM resolve the problem i will exchange it.
M
MooseBubs
02-09-2018, 02:53 PM #10

I'm waiting for your tests because i have the exact same problem with same RAM and CPU but a MSI PRO 650M-P mother board. If changing the RAM resolve the problem i will exchange it.

Pages (2): 1 2 Next