F5F Stay Refreshed Hardware Desktop Memory

Memory

Memory

Pages (2): 1 2 Next
V
Vykor817
Member
214
01-22-2018, 11:58 PM
#1
You recently upgraded to a 32GB (16x2) RAM at 3200MHz, but it doesn’t reach that speed. Your previous 16GB (8x2) worked smoothly at 3000MHz. Comparing the two, your older setup likely offers better performance. Your current specs include an i7-6700k processor, RTX 2080 Ti, 1TB SSD, and a 750W gold power supply.
V
Vykor817
01-22-2018, 11:58 PM #1

You recently upgraded to a 32GB (16x2) RAM at 3200MHz, but it doesn’t reach that speed. Your previous 16GB (8x2) worked smoothly at 3000MHz. Comparing the two, your older setup likely offers better performance. Your current specs include an i7-6700k processor, RTX 2080 Ti, 1TB SSD, and a 750W gold power supply.

J
jchy02
Junior Member
12
01-23-2018, 05:04 AM
#2
Improved speed using the older RAM setup. Two 8GB units work better for the memory controller. The 6700K offers solid performance, but it can be a bit finicky with larger memory sizes. If you don’t require 32GB, consider giving back the memory and reclaim your funds. Would Windows ever alert you about low system memory when you have 16GB?
J
jchy02
01-23-2018, 05:04 AM #2

Improved speed using the older RAM setup. Two 8GB units work better for the memory controller. The 6700K offers solid performance, but it can be a bit finicky with larger memory sizes. If you don’t require 32GB, consider giving back the memory and reclaim your funds. Would Windows ever alert you about low system memory when you have 16GB?

D
Dolphin029
Junior Member
18
01-23-2018, 07:16 AM
#3
It's not an issue at all; everything works well. Just needed 32GB for the game, but it suggested 16GB as a start. Upgrading would improve performance.
D
Dolphin029
01-23-2018, 07:16 AM #3

It's not an issue at all; everything works well. Just needed 32GB for the game, but it suggested 16GB as a start. Upgrading would improve performance.

B
BritneyBitxh
Member
62
01-23-2018, 08:27 AM
#4
With your setup, speed matters most. CPU core, cache, and memory all play a role. Quick performance is key.
B
BritneyBitxh
01-23-2018, 08:27 AM #4

With your setup, speed matters most. CPU core, cache, and memory all play a role. Quick performance is key.

E
Ender_Blades
Junior Member
23
02-01-2018, 09:18 PM
#5
Consider a compatible CPU and motherboard that match your current system's capabilities while leaving room for future expansion. Prioritize stability and compatibility to ensure smooth upgrades later.
E
Ender_Blades
02-01-2018, 09:18 PM #5

Consider a compatible CPU and motherboard that match your current system's capabilities while leaving room for future expansion. Prioritize stability and compatibility to ensure smooth upgrades later.

A
arcanjito
Junior Member
8
02-01-2018, 10:53 PM
#6
You might have tried turning on XMP but it didn’t work. Confirm you’re using the right memory slots for a dual-stick configuration. Your CPU supports DDR4-3200 and should work with any modern processor, whether from AMD or Intel. Be careful not to delay too much—older CPUs may switch to DDR5 later.
A
arcanjito
02-01-2018, 10:53 PM #6

You might have tried turning on XMP but it didn’t work. Confirm you’re using the right memory slots for a dual-stick configuration. Your CPU supports DDR4-3200 and should work with any modern processor, whether from AMD or Intel. Be careful not to delay too much—older CPUs may switch to DDR5 later.

W
Windiox
Member
226
02-02-2018, 06:49 AM
#7
The same rule of thumb still applies. I cannot guarantee 32gb running 3200mhz (XMP) on any platform. For reference and guesstimate in this forum hundreds (if not thousands) of threads contain the title " cannot run xmp of X frequency". I would send the memory back and save it for the platform upgrade. Cpu and board. Or wait for DDR5 like rascal mentioned... which is what I'm doing actually.
W
Windiox
02-02-2018, 06:49 AM #7

The same rule of thumb still applies. I cannot guarantee 32gb running 3200mhz (XMP) on any platform. For reference and guesstimate in this forum hundreds (if not thousands) of threads contain the title " cannot run xmp of X frequency". I would send the memory back and save it for the platform upgrade. Cpu and board. Or wait for DDR5 like rascal mentioned... which is what I'm doing actually.

A
anakindaur
Senior Member
576
02-03-2018, 09:03 AM
#8
I've already tried using XMP settings, but the system stays inactive until I shut it down and install the old RAM before it starts up. Thanks for sharing the details! I'm planning to explore new motherboards and processors now.
A
anakindaur
02-03-2018, 09:03 AM #8

I've already tried using XMP settings, but the system stays inactive until I shut it down and install the old RAM before it starts up. Thanks for sharing the details! I'm planning to explore new motherboards and processors now.

R
Ranaku
Member
51
02-05-2018, 08:11 AM
#9
This has really made a difference, thanks!
R
Ranaku
02-05-2018, 08:11 AM #9

This has really made a difference, thanks!

C
Colsta
Junior Member
15
02-05-2018, 11:47 PM
#10
I believe I'll follow what shrimp mentioned and hold on for the next generation.
C
Colsta
02-05-2018, 11:47 PM #10

I believe I'll follow what shrimp mentioned and hold on for the next generation.

Pages (2): 1 2 Next