Major issues with Ballistix OC troubleshooting

F5F Stay Refreshed Hardware Desktop Major issues with Ballistix OC troubleshooting

Pages (3): Previous 1 2 3 Next

Aquanow
Member

167

10-26-2023, 05:57 PM

#11

In that situation I believe I won't be very useful. The last time I worked on Intel was with DDR3 on Haswell. I have some Micron and Samsung 1600MHzCL9 sticks paired with 2200MHzCL9-2400MHzCL10, but otherwise my Haswell chip performed poorly—its IMC, core and ring were bad, making it impossible to reach high clocks without excessive voltages even after adjustments.

Aquanow

10-26-2023, 05:57 PM #11

suplxcty
Junior Member

10-30-2023, 08:24 AM

#12

I had prior work with Haswell and DDR3, right? I used 2400MHz 12-14-14-36 RAM on some HyperX 2x8Gb modules. No overclocking allowed since the CPU was an i5-4590...

suplxcty

10-30-2023, 08:24 AM #12

I had prior work with Haswell and DDR3, right? I used 2400MHz 12-14-14-36 RAM on some HyperX 2x8Gb modules. No overclocking allowed since the CPU was an i5-4590...

Lovechurros
Member

197

11-15-2023, 01:04 AM

#13

You can see which items are available by checking your system details. Look for the Burner or compatible components in your device settings or manufacturer's website. If it's blocked, verify the region restrictions and consider alternative sources.

Lovechurros

11-15-2023, 01:04 AM #13

CapivaraManca
Member

152

11-22-2023, 10:51 AM

#14

Taking out the heatsink isn't advised. The burner might misinterpret it, no matter what.

CapivaraManca

11-22-2023, 10:51 AM #14

Taking out the heatsink isn't advised. The burner might misinterpret it, no matter what.

Serilium
Member

183

11-22-2023, 03:57 PM

#15

I was searching for a Thaiphoon burner to keep the sticks intact, just for fun.

Serilium

11-22-2023, 03:57 PM #15

I was searching for a Thaiphoon burner to keep the sticks intact, just for fun.

Caironix
Junior Member

11-22-2023, 05:44 PM

#16

I just verified it, but it seems they're not functioning yet.

Caironix

11-22-2023, 05:44 PM #16

I just verified it, but it seems they're not functioning yet.

RamonTV
Junior Member

11-22-2023, 10:26 PM

#17

In addition to memory sticks, it's possible the board itself isn't suitable. Could you clarify which Z490 board you're referring to?

RamonTV

11-22-2023, 10:26 PM #17

In addition to memory sticks, it's possible the board itself isn't suitable. Could you clarify which Z490 board you're referring to?

Coopdaddy1919
Junior Member

11-23-2023, 06:20 AM

#18

The device being referred to is the Z490 Aorus Elite AC. It supports Ballistix connectors with 4000MHz ratings, and its maximum RAM speed is up to 5000MHz.

Coopdaddy1919

11-23-2023, 06:20 AM #18

The device being referred to is the Z490 Aorus Elite AC. It supports Ballistix connectors with 4000MHz ratings, and its maximum RAM speed is up to 5000MHz.

Menfa
Member

11-23-2023, 01:14 PM

#19

With two memory modules? Then consider adjusting the secondary and tertiary timings (besides tREFI, aim for a lower number for better stability)

Menfa

11-23-2023, 01:14 PM #19

With two memory modules? Then consider adjusting the secondary and tertiary timings (besides tREFI, aim for a lower number for better stability)

Peteechops25
Member

210

11-24-2023, 11:35 PM

#20

Identify the specific components listed and determine the necessary adjustments. Check the BIOS for details on changes and their costs.

Peteechops25

11-24-2023, 11:35 PM #20

Identify the specific components listed and determine the necessary adjustments. Check the BIOS for details on changes and their costs.

Pages (3): Previous 1 2 3 Next