Looking for assistance with your HP motherboard? Let me know what you need help with!
Looking for assistance with your HP motherboard? Let me know what you need help with!
This new PC you're talking about comes with RAM included. If you only need 16GB, I own a few older i7 models with that amount of memory at home. Looking at the local prices shows I could earn around $100 if I put in a lot of work. Right now they’re not worth selling, so I’m keeping them as backup or media devices. Your situation might be different—don’t expect to pay much for an old CPU. Have you already purchased the processor? If yes, then this isn’t really relevant.
I looked into this and found that the computer case can be opened from both sides, giving you better access to the back panel. This opens up more choices for CPU coolers. Some manufacturers use rivets on one side, so I assumed that was the case. If there are no rivets on either side, you can install any LGA1150 compatible cooler. The Phantom Spirit 120 SE is a solid option, though you don’t need it for an i7-4790k. Selecting a CPU cooler depends on your access—if both sides are open, go with a single-fan model. A good pick would be the Thermalright Assassin X SE, which includes an install kit and fits over the HP OEM backplate.
You can't access the case from the back; removing the motherboard is straightforward, but the back side is sealed and won’t budge.
For a complete removal of the motherboard, you must measure the backplate included with your HP model. Ensure there is sufficient space available. The first photo shows the back side of the HP motherboard, and the second displays the Thermalright Assassin X 90 SE with its installation kit.
I checked the hole spacing on the board, and it looks like the standard backplate is designed for a 70x70 size. If you need a 100x70 fit, you might have to adjust the setup or choose a different mounting option.