Lights on CPU and DRAM alternate rapidly
Lights on CPU and DRAM alternate rapidly
RAM is set up properly. The system functioned well before, so the configuration seems accurate. It has also worked in another device. Based on what I've heard, a RAM problem would typically show as a steady DRAM indicator rather than switching back and forth between the DRAM and CPU lights.
I attempted to reset the CMOS using only a metal screwdriver by positioning the metal component between the two pins to facilitate connection. Since I didn’t have a proper cap, I tried making my own improvise. However, it failed because either the technique wasn’t correct or the tool didn’t reset it properly.
You're experiencing the same problem with your Z490 gaming edge plus.
I experienced an issue with my tomahawk after purchasing a fresh set of crucial balistix. One stick arrived damaged, prompting a return, but the replacement worked perfectly. It seems the first stick was either dead or not compatible with the system.
Hello, I understand you're experiencing the same problem again. Could you let me know if the issue has been resolved and how?
Hi, i have the same problem. I changed my GPU. Step by step: 1. I changed my GPU 2. After press power on all my computer parts turn on, and after second turn off (loop). 3. I remove battery and insert 4. part 2 is gone but now i have blink cpu nad dram. 5. I removed all ram, added speaker to motherboard 6. Turned On, speaker made a sound 7. I inserted ram, and situation is the same.