F5F Stay Refreshed Hardware Desktop Let's analyze the issue together.

Let's analyze the issue together.

Let's analyze the issue together.

Q
Queffect
Member
219
06-12-2023, 11:21 AM
#1
Hello, I encountered an issue while playing Farming Simulator 22. The error message from the event manager read: "The computer has rebooted from a bugcheck." It listed a specific memory error code and mentioned a DMP file was saved. After running mem diag, it confirmed hardware errors in the memory and advised contacting the manufacturer. If the problem relates to RAM, you might want to check for faulty modules or update drivers. Also, since Paint.NET showed choppy performance when cropping images, consider closing background applications or updating your graphics drivers. Task Manager shows full 16 GB available—ensure no processes are consuming excessive memory. Let me know if you need further guidance!
Q
Queffect
06-12-2023, 11:21 AM #1

Hello, I encountered an issue while playing Farming Simulator 22. The error message from the event manager read: "The computer has rebooted from a bugcheck." It listed a specific memory error code and mentioned a DMP file was saved. After running mem diag, it confirmed hardware errors in the memory and advised contacting the manufacturer. If the problem relates to RAM, you might want to check for faulty modules or update drivers. Also, since Paint.NET showed choppy performance when cropping images, consider closing background applications or updating your graphics drivers. Task Manager shows full 16 GB available—ensure no processes are consuming excessive memory. Let me know if you need further guidance!

W
WillZilla03
Junior Member
43
06-12-2023, 01:08 PM
#2
You might consider reducing your RAM speed if XMP/EXPO is enabled and run a memtest to verify. However, besides adjusting speeds back to defaults, a faulty RAM module could be the issue. I haven’t run memtest much, so it won’t pinpoint which stick is problematic. You could try removing one stick, testing it, and switching if necessary.
W
WillZilla03
06-12-2023, 01:08 PM #2

You might consider reducing your RAM speed if XMP/EXPO is enabled and run a memtest to verify. However, besides adjusting speeds back to defaults, a faulty RAM module could be the issue. I haven’t run memtest much, so it won’t pinpoint which stick is problematic. You could try removing one stick, testing it, and switching if necessary.

_
___iRekt___
Senior Member
505
06-12-2023, 02:44 PM
#3
I haven’t done any overclocking, and all 16 are present. My PC was assembled in 2020, which makes me worried about the RAM failing. That’s frustrating.
_
___iRekt___
06-12-2023, 02:44 PM #3

I haven’t done any overclocking, and all 16 are present. My PC was assembled in 2020, which makes me worried about the RAM failing. That’s frustrating.

B
54
06-12-2023, 03:02 PM
#4
I would reposition the RAM, adjust BIOS to Auto/Default, and then perform another stability check. Start with both modules, then proceed sequentially if needed.
B
Bad_Luck_Lance
06-12-2023, 03:02 PM #4

I would reposition the RAM, adjust BIOS to Auto/Default, and then perform another stability check. Start with both modules, then proceed sequentially if needed.

M
MessoJR
Member
129
06-16-2023, 10:42 PM
#5
Sure, I'm ready for you tomorrow morning.
M
MessoJR
06-16-2023, 10:42 PM #5

Sure, I'm ready for you tomorrow morning.