Issues with default XMP settings on ASUS TUF Gaming X570 Plus and Ryzen 3700X

F5F Stay Refreshed Hardware Desktop Issues with default XMP settings on ASUS TUF Gaming X570 Plus and Ryzen 3700X

RobbeCop
Junior Member

02-15-2019, 04:44 AM

Hello everyone, I recently purchased this RAM kit: G.SKILL Trident Z RGB 64GB 3600MHz DDR4 (32GBx2) CL 18-22-22-42. The model is F4-3600C18D-64GTZR. After setting the default XMP profile to 3600Mhz in the BIOS, it didn't boot properly—system failed to start. I then changed it back to the default 2133Mhz. Any suggestions or advice would be appreciated.

RobbeCop

02-15-2019, 04:44 AM #1

ronny2003
Junior Member

02-17-2019, 07:45 AM

certain ryan 3000 processors are restricted from reaching 3600mhz because of IMC constraints; you’d need to manually adjust RAM speed to 3200mhz via BIOS.

ronny2003

02-17-2019, 07:45 AM #2

certain ryan 3000 processors are restricted from reaching 3600mhz because of IMC constraints; you’d need to manually adjust RAM speed to 3200mhz via BIOS.

daemon29
Member

02-23-2019, 01:32 PM

Recent motherboard BIOS updates include improvements for compatibility and performance across various platforms.

daemon29

02-23-2019, 01:32 PM #3

Recent motherboard BIOS updates include improvements for compatibility and performance across various platforms.

xXRAXERXx
Posting Freak

817

02-23-2019, 03:22 PM

You can retain the other settings from the XMP profile and simply adjust the RAM speed to 3200Mhz. The update didn’t resolve the issue.

xXRAXERXx

02-23-2019, 03:22 PM #4

You can retain the other settings from the XMP profile and simply adjust the RAM speed to 3200Mhz. The update didn’t resolve the issue.

Ozwego
Member

191

03-07-2019, 12:47 PM

Turn off XMP then adjust the speed to 3200 directly.

Ozwego

03-07-2019, 12:47 PM #5

Turn off XMP then adjust the speed to 3200 directly.

ChickenPhoYou
Posting Freak

850

03-07-2019, 08:56 PM

No, using those low timings would rely on the JEDEC standard 2133/2400/2666, which is based on the RAM, and it could cause memory instability.

ChickenPhoYou

03-07-2019, 08:56 PM #6

No, using those low timings would rely on the JEDEC standard 2133/2400/2666, which is based on the RAM, and it could cause memory instability.

DanielEmpire
Posting Freak

781

03-09-2019, 09:02 PM

Operating successfully at 3200. Appreciate your confirmation. I retain all settings from the XMP profile.

DanielEmpire

03-09-2019, 09:02 PM #7

Operating successfully at 3200. Appreciate your confirmation. I retain all settings from the XMP profile.