F5F Stay Refreshed Hardware Desktop Issues encountered during the upgrade process for i5-4690K

Issues encountered during the upgrade process for i5-4690K

Issues encountered during the upgrade process for i5-4690K

Pages (3): Previous 1 2 3 Next
C
Camsell
Member
207
08-17-2016, 04:02 AM
#11
I might have misunderstood, but I don’t see the need to descend into BIOS instead of ascending. It looks like updating to the latest version should be fine. The current i3-4130 is a fourth-generation chip, so keeping within that generation shouldn’t cause compatibility issues.
C
Camsell
08-17-2016, 04:02 AM #11

I might have misunderstood, but I don’t see the need to descend into BIOS instead of ascending. It looks like updating to the latest version should be fine. The current i3-4130 is a fourth-generation chip, so keeping within that generation shouldn’t cause compatibility issues.

V
VOZIXGOD
Member
68
08-17-2016, 11:48 AM
#12
Check requirements for i5-4690K on ASUS support site
Minimum BIOS version required is 0805
V
VOZIXGOD
08-17-2016, 11:48 AM #12

Check requirements for i5-4690K on ASUS support site
Minimum BIOS version required is 0805

F
FabiZz_PvP
Junior Member
19
08-17-2016, 07:33 PM
#13
I've used 30 seconds to an hour, yet I didn't unplug it during the CMOS reset.
F
FabiZz_PvP
08-17-2016, 07:33 PM #13

I've used 30 seconds to an hour, yet I didn't unplug it during the CMOS reset.

M
Maail99
Member
161
08-19-2016, 01:56 PM
#14
latest bios aren't always optimal for every setup. they're worth testing, like certain ASUS ROG boards. check RAM compatibility with specific upgrades—such as the Extreme X99 board. for example, a Kingston DDR4 2666 CL15 won’t work at 1902 MHz, but it functions below that threshold. It might be your RAM combo with the 4690K that’s limiting performance. Just give it a shot; you can’t go wrong.
M
Maail99
08-19-2016, 01:56 PM #14

latest bios aren't always optimal for every setup. they're worth testing, like certain ASUS ROG boards. check RAM compatibility with specific upgrades—such as the Extreme X99 board. for example, a Kingston DDR4 2666 CL15 won’t work at 1902 MHz, but it functions below that threshold. It might be your RAM combo with the 4690K that’s limiting performance. Just give it a shot; you can’t go wrong.

T
Totoro_Playz
Member
60
09-06-2016, 01:42 PM
#15
I just attempted it, but there was nothing.
T
Totoro_Playz
09-06-2016, 01:42 PM #15

I just attempted it, but there was nothing.

S
scize
Member
59
09-06-2016, 03:12 PM
#16
I have a RAM setup of two 8GB Balistix modules. I'm going to try...
S
scize
09-06-2016, 03:12 PM #16

I have a RAM setup of two 8GB Balistix modules. I'm going to try...

_
___iRekt___
Senior Member
505
09-13-2016, 08:35 AM
#17
checked all BIOS versions from 0805 to 1103, performed CMOS reset, used 2 to 1 RAM sticks (switched slots and RAM). no success.
_
___iRekt___
09-13-2016, 08:35 AM #17

checked all BIOS versions from 0805 to 1103, performed CMOS reset, used 2 to 1 RAM sticks (switched slots and RAM). no success.

K
Kubninjan
Senior Member
389
09-21-2016, 07:10 AM
#18
Consider reaching out to ASUS for more information.
K
Kubninjan
09-21-2016, 07:10 AM #18

Consider reaching out to ASUS for more information.

D
Darkslicer11
Member
113
09-26-2016, 06:49 AM
#19
bump
D
Darkslicer11
09-26-2016, 06:49 AM #19

bump

U
Unmigrate
Senior Member
644
10-01-2016, 07:56 PM
#20
In my view, the issue likely lies with your motherboard's PSU. It seems to have just a 4-pin CPU power connector, which might not support a 4690K processor properly. You probably need a 4+2 pin connector for that chip.
U
Unmigrate
10-01-2016, 07:56 PM #20

In my view, the issue likely lies with your motherboard's PSU. It seems to have just a 4-pin CPU power connector, which might not support a 4690K processor properly. You probably need a 4+2 pin connector for that chip.

Pages (3): Previous 1 2 3 Next