Issue with Fury 8GB RAM DDR not initializing on Asus Prime A320 K motherboard.

F5F Stay Refreshed Hardware Desktop Issue with Fury 8GB RAM DDR not initializing on Asus Prime A320 K motherboard.

Pages (2): 1 2 Next

Okunino
Posting Freak

845

07-15-2017, 07:35 AM

Hi there, I hope you're doing well. I bought a Hyper Fury 8GB DDR 4 RAM card and checked online that it should work with my Asus Prime A320K motherboard. But it doesn’t seem to load. Could you give some tips on how to fix this? Thanks!

Okunino

07-15-2017, 07:35 AM #1

JeanTheLegend
Member

07-15-2017, 02:07 PM

Do you have only this RAM module, or does another one occupy slots two through four?

JeanTheLegend

07-15-2017, 02:07 PM #2

Do you have only this RAM module, or does another one occupy slots two through four?

imTri
Posting Freak

786

07-15-2017, 05:21 PM

I don't have a CPU, but I'm here to help! What's your question?

imTri

07-15-2017, 05:21 PM #3

I don't have a CPU, but I'm here to help! What's your question?

patbreslin
Member

161

07-23-2017, 08:52 AM

Only two positions were available, making slot A1 the best choice for installing a single stick

patbreslin

07-23-2017, 08:52 AM #4

Only two positions were available, making slot A1 the best choice for installing a single stick

Darthsonix
Junior Member

07-23-2017, 10:44 AM

It contains an important 8Gb DDR4 memory.

Darthsonix

07-23-2017, 10:44 AM #5

It contains an important 8Gb DDR4 memory.

DiamondXX101
Member

108

07-23-2017, 11:11 AM

They were informed they would collaborate.

DiamondXX101

07-23-2017, 11:11 AM #6

They were informed they would collaborate.

Pigy_Rex
Junior Member

07-23-2017, 07:22 PM

Pigy_Rex

07-23-2017, 07:22 PM #7

X_pinkie_pie_Z
Member

07-31-2017, 02:23 PM

I noticed something unusual about your setup. It seems your motherboard lacks four expansion slots, which might affect your response. Let me know if you need help with alternatives!

X_pinkie_pie_Z

07-31-2017, 02:23 PM #8

I noticed something unusual about your setup. It seems your motherboard lacks four expansion slots, which might affect your response. Let me know if you need help with alternatives!

IcyPvPz
Member

210

07-31-2017, 02:43 PM

The speeds of each stick are as follows:

IcyPvPz

07-31-2017, 02:43 PM #9

The speeds of each stick are as follows:

sibioplayer
Junior Member

08-04-2017, 10:57 PM

#10

Start with the HyperX Fury Stick, power on the PC. If it boots, replace it. Power off and install the necessary stick. If that fails, verify the frequency of both sticks. Set the boot speed to the lower frequency—like 3000Hz if one is 3000 and another 3600. You can also apply the default setting of 2133MHz.

sibioplayer

08-04-2017, 10:57 PM #10

Pages (2): 1 2 Next