Issue with Fury 8GB RAM DDR not initializing on Asus Prime A320 K motherboard.
Issue with Fury 8GB RAM DDR not initializing on Asus Prime A320 K motherboard.
It's possible to use various RAM types and speeds. Just ensure the PC starts with the correct speed and timing settings.
I've tested it and it functions but the CMOS keeps failing, forcing a reset. Now I'm limited to the slowest speed available. For example, 4GB at 2400MHz with another 4GB would run smoothly at that frequency. I ended up opting for 16GB at 3600MHz instead of sticking with 2400MHz.
It seems like things didn’t go as planned. Check the image of the important 8GB drive. You’ll want to confirm the ICS. For the Kingston 8GB, you’ll need another 8GB—consider a used bare PCB version around $23 on eBay if you’re looking for a cheaper option.
micron rev j offers performance close to rev e with slight improvements, delivering similar speeds around 4600+ c18/17 (~1.6v). You’ll find ebay listings for 8gb 2666 chips around $23, though local options might be available. Be sure to provide your I.C. (d9wsm) and you’re matched with the right rams. These parts are very reliable, so don’t worry about lowbin—they’re quite capable. Consider searching online for a ballistix 3600 c14 OC profile to install easily; you can adjust them up to 3800-4200 c14 based on your clock speed if desired. Just keep the fan speed under 1.5v to protect these temperature-sensitive components, and aim for no more than 1.7v overall for best results.