F5F Stay Refreshed Hardware Desktop Is your motherboard not working?

Is your motherboard not working?

Is your motherboard not working?

Pages (2): Previous 1 2
C
coyote888
Posting Freak
838
09-25-2019, 03:46 PM
#11
Uncertain about the meaning of the MSI window or how it behaves. Some might be familiar with it, but I’m not. It could relate to the CPU or motherboard, yet it’s tough to identify without debugging details. Without any information, it seems MSI is handling the task.
C
coyote888
09-25-2019, 03:46 PM #11

Uncertain about the meaning of the MSI window or how it behaves. Some might be familiar with it, but I’m not. It could relate to the CPU or motherboard, yet it’s tough to identify without debugging details. Without any information, it seems MSI is handling the task.

M
Mehmet_OM
Junior Member
5
10-01-2019, 05:21 PM
#12
You disconnected all power sources from the rear of the machine during the CMOS reset process. There were instances where resetting the CMOS failed due to the DisplayPort signal from the graphics card reaching the motherboard.
M
Mehmet_OM
10-01-2019, 05:21 PM #12

You disconnected all power sources from the rear of the machine during the CMOS reset process. There were instances where resetting the CMOS failed due to the DisplayPort signal from the graphics card reaching the motherboard.

P
Psychotic9244
Member
58
10-04-2019, 07:17 AM
#13
All systems were turned off and I pressed the reset button before clearing the CMOS to remove any remaining charge.
P
Psychotic9244
10-04-2019, 07:17 AM #13

All systems were turned off and I pressed the reset button before clearing the CMOS to remove any remaining charge.

L
Lochka
Junior Member
8
10-06-2019, 03:56 PM
#14
Did you create it yourself or did someone else? I observed a smooth performance with a Ryzen 1200 processor on board B450M-A earlier this week. It was removed from its socket and put back in, then everything worked perfectly. I suspect the pins might not have made solid contact while I packed the socket with electrical grease. To simplify things, I've replaced a couple of CPUs on the board, but sometimes the 1200 still wouldn't post. Re-seating it resolved the problem. When examining the chip closely, I noticed a few pins slightly bent in one row. I straightened them and it's been fine ever since.
L
Lochka
10-06-2019, 03:56 PM #14

Did you create it yourself or did someone else? I observed a smooth performance with a Ryzen 1200 processor on board B450M-A earlier this week. It was removed from its socket and put back in, then everything worked perfectly. I suspect the pins might not have made solid contact while I packed the socket with electrical grease. To simplify things, I've replaced a couple of CPUs on the board, but sometimes the 1200 still wouldn't post. Re-seating it resolved the problem. When examining the chip closely, I noticed a few pins slightly bent in one row. I straightened them and it's been fine ever since.

T
Th3G4merX
Senior Member
700
10-06-2019, 04:29 PM
#15
I assembled it myself. After removing all components from their packaging and putting everything back together, it started working immediately. I ran it through several stress tests to verify its performance. Eventually, I gave it to him as a gift for Christmas. He used it for roughly two weeks before reporting a few shutdowns while playing games. After that, it stopped working completely and never came back on. Since I wasn’t monitoring the PC every time he used it, I can’t confirm he never opened it or made any changes.
T
Th3G4merX
10-06-2019, 04:29 PM #15

I assembled it myself. After removing all components from their packaging and putting everything back together, it started working immediately. I ran it through several stress tests to verify its performance. Eventually, I gave it to him as a gift for Christmas. He used it for roughly two weeks before reporting a few shutdowns while playing games. After that, it stopped working completely and never came back on. Since I wasn’t monitoring the PC every time he used it, I can’t confirm he never opened it or made any changes.

T
Tman586
Junior Member
4
10-07-2019, 04:28 PM
#16
Take back the board immediately.
T
Tman586
10-07-2019, 04:28 PM #16

Take back the board immediately.

B
BrianChew
Member
57
10-15-2019, 03:35 PM
#17
B
BrianChew
10-15-2019, 03:35 PM #17

P
ProjectShadow
Member
187
10-15-2019, 06:54 PM
#18
It seems the GPU was likely damaged, causing the OC protection to trip. After replacing it with a new one, the system started working properly. I remember thinking I might have booted without a GPU at all, but probably only tried with the power supply disconnected. Either way, the issue is resolved now.
P
ProjectShadow
10-15-2019, 06:54 PM #18

It seems the GPU was likely damaged, causing the OC protection to trip. After replacing it with a new one, the system started working properly. I remember thinking I might have booted without a GPU at all, but probably only tried with the power supply disconnected. Either way, the issue is resolved now.

Pages (2): Previous 1 2