F5F Stay Refreshed Software Operating Systems Installation failed to start Windows 10 UEFI version.

Installation failed to start Windows 10 UEFI version.

Installation failed to start Windows 10 UEFI version.

Pages (2): 1 2 Next
K
kristina7873
Junior Member
17
08-10-2016, 01:44 AM
#1
Initially I attempted to set up another operating system on the disk, but it wouldn't boot in UEFI. I then tried erasing the drive and installing Windows 10 to test if it would boot from the disk, though the laptop still refuses to accept a boot attempt. I’m unsure why this particular disk isn’t working at all. I have another SSD running Windows 10 that boots fine in UEFI, so something must be wrong. My Toshiba Portege R930 is the model in question. Please share more details if you can. Thank you! P.S.: I have a snapshot of my disk management showing the 120GB SSD is completely non-bootable while the 256GB works perfectly.
K
kristina7873
08-10-2016, 01:44 AM #1

Initially I attempted to set up another operating system on the disk, but it wouldn't boot in UEFI. I then tried erasing the drive and installing Windows 10 to test if it would boot from the disk, though the laptop still refuses to accept a boot attempt. I’m unsure why this particular disk isn’t working at all. I have another SSD running Windows 10 that boots fine in UEFI, so something must be wrong. My Toshiba Portege R930 is the model in question. Please share more details if you can. Thank you! P.S.: I have a snapshot of my disk management showing the 120GB SSD is completely non-bootable while the 256GB works perfectly.

E
EuropeanUnion
Senior Member
700
08-10-2016, 09:16 AM
#2
Yes, it seems like none of the information about the 120gb matters. You're okay with losing everything.
E
EuropeanUnion
08-10-2016, 09:16 AM #2

Yes, it seems like none of the information about the 120gb matters. You're okay with losing everything.

S
sergant1109
Junior Member
20
08-18-2016, 05:06 AM
#3
Everything significant is stored within the 256 unit.
S
sergant1109
08-18-2016, 05:06 AM #3

Everything significant is stored within the 256 unit.

S
SarityJr
Member
175
08-18-2016, 06:53 AM
#4
Check msconfig.exe too; for UEFI boot, pick Windows Boot Manager instead of the drive.
S
SarityJr
08-18-2016, 06:53 AM #4

Check msconfig.exe too; for UEFI boot, pick Windows Boot Manager instead of the drive.

K
KilleurMiino
Member
166
08-22-2016, 04:24 PM
#5
You should boot into the operating system that comes with the 120GB SSD, ensuring it loads correctly and functions as expected.
K
KilleurMiino
08-22-2016, 04:24 PM #5

You should boot into the operating system that comes with the 120GB SSD, ensuring it loads correctly and functions as expected.

A
Aulexius
Junior Member
38
08-30-2016, 01:42 AM
#6
You're asking for clarification on your question.
A
Aulexius
08-30-2016, 01:42 AM #6

You're asking for clarification on your question.

A
Attack87
Junior Member
17
09-03-2016, 10:06 PM
#7
Did you really mean to ask this? As noted, I just set up a new Windows 10 on the SSD and can't boot from it. Now what would you say? If it's not clear enough, I’m sure you’re right—I can confirm that when installing Windows 10 into the 120GB SSD, the 256GB one isn’t connected at all. Only one drive is linked to the laptop at any time, and the EFI partition is visible on the 120GB SSD.
A
Attack87
09-03-2016, 10:06 PM #7

Did you really mean to ask this? As noted, I just set up a new Windows 10 on the SSD and can't boot from it. Now what would you say? If it's not clear enough, I’m sure you’re right—I can confirm that when installing Windows 10 into the 120GB SSD, the 256GB one isn’t connected at all. Only one drive is linked to the laptop at any time, and the EFI partition is visible on the 120GB SSD.

Z
Zmondy
Senior Member
405
09-03-2016, 11:32 PM
#8
Begin by launching Start, enter CMD, right-click CMD.exe and select Run As Administrator. Proceed to input commands one by one, pressing Enter after each Diskpart Select Disk 0 Clean Exit command. Remember, this is based on the screenshot you provided; ensure your 120gb drive remains listed as Disk 0 in Disk Management before running the clean command. Clearing the wrong drive will erase it and lose data. You're warned. Next, power off the laptop and disconnect the 250gb drive completely. Launch Windows Setup using your installation media. On the partition screen, click next without assigning any partitions. Complete the setup as usual. The laptop should now boot from the 120gb drive. If it doesn't respond again, we'll review the UEFI settings.
Z
Zmondy
09-03-2016, 11:32 PM #8

Begin by launching Start, enter CMD, right-click CMD.exe and select Run As Administrator. Proceed to input commands one by one, pressing Enter after each Diskpart Select Disk 0 Clean Exit command. Remember, this is based on the screenshot you provided; ensure your 120gb drive remains listed as Disk 0 in Disk Management before running the clean command. Clearing the wrong drive will erase it and lose data. You're warned. Next, power off the laptop and disconnect the 250gb drive completely. Launch Windows Setup using your installation media. On the partition screen, click next without assigning any partitions. Complete the setup as usual. The laptop should now boot from the 120gb drive. If it doesn't respond again, we'll review the UEFI settings.

S
Silvinha10
Senior Member
694
09-07-2016, 03:14 AM
#9
I acknowledge that I followed the instructions you provided before starting this discussion. Thank you for your work, my friend—I really appreciate it.
S
Silvinha10
09-07-2016, 03:14 AM #9

I acknowledge that I followed the instructions you provided before starting this discussion. Thank you for your work, my friend—I really appreciate it.

J
JokerFame
Senior Member
670
09-26-2016, 05:15 AM
#10
J
JokerFame
09-26-2016, 05:15 AM #10

Pages (2): 1 2 Next