Increase GPU performance by adjusting settings and configurations.
Increase GPU performance by adjusting settings and configurations.
I recently connected my GPU to the watercooler and tried to push it overclock. The MSI Afterburner curve is at its highest setting with 3270mhz at 1240mv, memory is set to 11732mhz. Temperatures and heat output are normal, usage is full, but it only hits a max of 2835mhz. How can I get more performance?
You're likely running out of power. You'll need to adjust your settings on your card.
This tutorial explains how to increase your GPU frequency in steps. You're currently reaching 2850MHz and referencing a guide for further instructions.
Completed the 8k optimized test in Unigine. Maintained a steady clock speed of 3060MHz (+210) throughout, but experienced roughly 20 degrees cooler temperatures compared to Furmark. Still unsure what to do. Managed to continue climbing. Now stable at around 230MHz (3090MHz), with ambient temps near 55°C. Furmark reaches 71°C at 2835MHz. Which is more reflective of real-world gaming? Furmark or Unigine? Not sure if I should push further.
I've reached +250mhz successfully (3090mhz in Unigine, 2890mhz in Furmark). Unigine requires 3585 mb VRAM, consumes 283 watts, and operates at 61 degrees at 4k resolution. Furmark needs 224mb VRAM, up to 320w power, and runs at 63 degrees on 3440x1440. It tends to stutter at 4k. I'm confused about the differences. I'll stop here and check how it performs in games.
Varied demands and differing processing speeds can cause instability in your card during light 3D tasks since higher clock speeds increase performance expectations.
Furmark is a power virus designed to push the card to generate maximum watts. It excels in analyzing or enhancing thermal conditions.
Use GPU-z to explore sensors. While testing your GPU, check the PerCapReason setting. This will reveal the maximum limits your card can reach. Regarding overclocking overall, I believe it's not worthwhile. You might see a small boost in speed but at the cost of shorter lifespan. That's your equipment—your decision.