Idle voltage stays consistent between 1.4 and 1.45 for this model.

F5F Stay Refreshed Hardware Desktop Idle voltage stays consistent between 1.4 and 1.45 for this model.

Pages (3): 1 2 3 Next

226

12-08-2016, 05:25 AM

Check the settings in the control panel and adjust them accordingly. If needed, consult the manual for guidance on stabilizing the idle voltage.

LuLuPlaysCraft

12-08-2016, 05:25 AM #1

Check the settings in the control panel and adjust them accordingly. If needed, consult the manual for guidance on stabilizing the idle voltage.

iNeeR7
Junior Member

12-08-2016, 03:19 PM

Use Ryzen Master to adjust the voltage manually. Set it to 1.325 when not overclocking. If overclocking is enabled, set it to 1.375 for easier overclocking.

iNeeR7

12-08-2016, 03:19 PM #2

Use Ryzen Master to adjust the voltage manually. Set it to 1.325 when not overclocking. If overclocking is enabled, set it to 1.375 for easier overclocking.

Meg
Junior Member

12-08-2016, 05:03 PM

Meg

12-08-2016, 05:03 PM #3

Chester709
Junior Member

12-12-2016, 05:05 PM

Impacts the heat level as well. At 1.4 volts the temperature fluctuates from 50 to 60. Around 0.9 volts results in 30 to 40 degrees. Most power options other than "energy saving" provide 1.4 volts.

Chester709

12-12-2016, 05:05 PM #4

Impacts the heat level as well. At 1.4 volts the temperature fluctuates from 50 to 60. Around 0.9 volts results in 30 to 40 degrees. Most power options other than "energy saving" provide 1.4 volts.

Expandablexx
Junior Member

12-12-2016, 05:17 PM

I don't have a specific reporting program to mention. Could you clarify which one you're referring to?

Expandablexx

12-12-2016, 05:17 PM #5

I don't have a specific reporting program to mention. Could you clarify which one you're referring to?

Koraysa
Member

12-15-2016, 07:24 PM

HWMonitor

Koraysa

12-15-2016, 07:24 PM #6

HWMonitor

clay__
Member

159

12-17-2016, 03:28 PM

Currently, only Ryzen Master and HWinfo are functioning correctly. This is the initial problem.

clay__

12-17-2016, 03:28 PM #7

Currently, only Ryzen Master and HWinfo are functioning correctly. This is the initial problem.

bengalwatcher
Posting Freak

801

12-21-2016, 09:04 AM

AMD redesigned their voltage control and sensor components, which has been a concern since the Zen2 release. Some users experience high idle voltages, though many cases are minor fluctuations and unfamiliar to new setups.

bengalwatcher

12-21-2016, 09:04 AM #8

CrazyBlayzer
Junior Member

12-21-2016, 09:34 AM

Check if you're employing Ryzen Master or CPU-Z for voltage readings and confirm your BIOS is current.

CrazyBlayzer

12-21-2016, 09:34 AM #9

Check if you're employing Ryzen Master or CPU-Z for voltage readings and confirm your BIOS is current.

Killamerc
Junior Member

12-21-2016, 11:42 AM

#10

I've verified it. My current version is f41, even though f50 isn't available. Updating might be beneficial.

Killamerc

12-21-2016, 11:42 AM #10

I've verified it. My current version is f41, even though f50 isn't available. Updating might be beneficial.

Pages (3): 1 2 3 Next