F5F Stay Refreshed Power Users Networks Ideas for wireless cards compatible with pfSense

Ideas for wireless cards compatible with pfSense

Ideas for wireless cards compatible with pfSense

Pages (2): 1 2 Next
V
Vector_VIP
Junior Member
35
07-30-2023, 09:24 PM
#1
I acquired a pfSense device to set up a dedicated network, focusing on its routing features instead of firewall functions. I currently own a Linksys wireless router that has performed poorly over the past months, with frequent issues like reboots and factory resets. I’m considering a wireless networking card for my pfSense to enable communication between my wireless and wired devices. For example, my laptop should be able to access the shared network drive, and my Windows Server must be able to see my laptop or phone. I also need the ability to manage IP addresses for wireless devices via Windows Server. Ideally, I’d like a 5GHz card. Could you share what others use for wireless cards on pfSense? This would help me choose appropriately and avoid common pitfalls.
V
Vector_VIP
07-30-2023, 09:24 PM #1

I acquired a pfSense device to set up a dedicated network, focusing on its routing features instead of firewall functions. I currently own a Linksys wireless router that has performed poorly over the past months, with frequent issues like reboots and factory resets. I’m considering a wireless networking card for my pfSense to enable communication between my wireless and wired devices. For example, my laptop should be able to access the shared network drive, and my Windows Server must be able to see my laptop or phone. I also need the ability to manage IP addresses for wireless devices via Windows Server. Ideally, I’d like a 5GHz card. Could you share what others use for wireless cards on pfSense? This would help me choose appropriately and avoid common pitfalls.

G
GMB_01
Member
231
07-31-2023, 07:37 AM
#2
Wireless cards aren't advised for pfSense. Use an access point. Ubiquiti devices perform well.
G
GMB_01
07-31-2023, 07:37 AM #2

Wireless cards aren't advised for pfSense. Use an access point. Ubiquiti devices perform well.

S
super_kuzma
Member
146
08-01-2023, 06:46 AM
#3
I was considering this, but I prefer not to invest a lot of money. I just need a card that’s easy to use and I can toss it in without hassle. A wireless one costs around $50, but if I go with Ubiquiti I’ll be spending at least $100 to keep up with my router’s range. Plus, I’d like everything in one place for management.
S
super_kuzma
08-01-2023, 06:46 AM #3

I was considering this, but I prefer not to invest a lot of money. I just need a card that’s easy to use and I can toss it in without hassle. A wireless one costs around $50, but if I go with Ubiquiti I’ll be spending at least $100 to keep up with my router’s range. Plus, I’d like everything in one place for management.

W
wolfpup118
Member
229
08-01-2023, 03:11 PM
#4
This version appears functional for PfSense.
W
wolfpup118
08-01-2023, 03:11 PM #4

This version appears functional for PfSense.

M
mma0648
Junior Member
19
08-03-2023, 08:59 AM
#5
The article explains the wireless hardware documentation for PfSense, covering details about Wi-Fi cards.
M
mma0648
08-03-2023, 08:59 AM #5

The article explains the wireless hardware documentation for PfSense, covering details about Wi-Fi cards.

T
TardisImpala
Member
71
08-03-2023, 08:45 PM
#6
Configured PfSense as the router. If you're satisfied with the Wi-Fi, switch the router settings and connect it to your Ethernet network as a Wi-Fi bridge; it will function like an access point.
T
TardisImpala
08-03-2023, 08:45 PM #6

Configured PfSense as the router. If you're satisfied with the Wi-Fi, switch the router settings and connect it to your Ethernet network as a Wi-Fi bridge; it will function like an access point.

A
axelking777
Member
59
08-04-2023, 12:49 AM
#7
I attempted that, but it seems there isn<|pad|>'s option for a bridged setup. I've checked everywhere and tried connecting my wan cable to a LAN port, but it didn't work. I'll revisit this later. If it doesn't function, I'll likely install the wireless card suggested earlier and use Ubiquiti equipment next time.
A
axelking777
08-04-2023, 12:49 AM #7

I attempted that, but it seems there isn<|pad|>'s option for a bridged setup. I've checked everywhere and tried connecting my wan cable to a LAN port, but it didn't work. I'll revisit this later. If it doesn't function, I'll likely install the wireless card suggested earlier and use Ubiquiti equipment next time.

G
GreeenBear
Member
156
08-10-2023, 02:45 PM
#8
I checked the card again before, but I couldn't locate the Netgate article. As long as Amazon offers a solid return policy, I think I'll secure that card.
G
GreeenBear
08-10-2023, 02:45 PM #8

I checked the card again before, but I couldn't locate the Netgate article. As long as Amazon offers a solid return policy, I think I'll secure that card.

A
Alexiopro
Member
91
08-10-2023, 07:53 PM
#9
What model is the Linksys switch? It might be possible to flash it for running dd-wrt or tomato. They sometimes have a hidden advanced menu that lets you make these adjustments.
A
Alexiopro
08-10-2023, 07:53 PM #9

What model is the Linksys switch? It might be possible to flash it for running dd-wrt or tomato. They sometimes have a hidden advanced menu that lets you make these adjustments.

A
ASFLavaCraft
Member
64
08-30-2023, 02:45 AM
#10
Disable DHCP, assign a static IP on the local side, and link it through a LAN port to your network.
A
ASFLavaCraft
08-30-2023, 02:45 AM #10

Disable DHCP, assign a static IP on the local side, and link it through a LAN port to your network.

Pages (2): 1 2 Next