I made a change to my processor and the device stopped functioning!

F5F Stay Refreshed Hardware Desktop I made a change to my processor and the device stopped functioning!

Pages (2): 1 2 Next

HoundLynx
Member

233

12-03-2018, 08:06 PM

Your Ryzen 3 2200G is functioning correctly now, but after replacing it with the Ryzen 5 2600, your monitors remain black. Swapping back to the original CPU resolved the issue. No visible damage was found on the motherboard (Prime B450M). Consider checking connections, power supply stability, or monitor cables for faults.

HoundLynx

12-03-2018, 08:06 PM #1

Thuthur
Member

191

12-09-2018, 11:52 PM

Is there another GPU included? If so, is it connected directly, not via the motherboard? Otherwise, you should obtain a separate GPU because the 2600 lacks one built-in.

Thuthur

12-09-2018, 11:52 PM #2

Is there another GPU included? If so, is it connected directly, not via the motherboard? Otherwise, you should obtain a separate GPU because the 2600 lacks one built-in.

lSticKl
Member

211

12-26-2018, 07:22 AM

Is your screen connected to the mainboard's display port? The Ryzen 5 2600 lacks a dedicated graphics card, meaning you can't connect it via the motherboard's ports.

lSticKl

12-26-2018, 07:22 AM #3

Is your screen connected to the mainboard's display port? The Ryzen 5 2600 lacks a dedicated graphics card, meaning you can't connect it via the motherboard's ports.

arty2005
Member

212

12-26-2018, 03:19 PM

Everyone else mentioned that the 2600 requires a separate graphics card. Since you have one, it's unclear how to proceed.

arty2005

12-26-2018, 03:19 PM #4

Everyone else mentioned that the 2600 requires a separate graphics card. Since you have one, it's unclear how to proceed.

seriosh
Member

181

12-26-2018, 04:39 PM

I own a specialized GPU, an Radeon RX 570

seriosh

12-26-2018, 04:39 PM #5

I own a specialized GPU, an Radeon RX 570

xJustKevinx
Junior Member

12-28-2018, 03:22 AM

It also fails when you connect the monitor cables directly to the GPU.

xJustKevinx

12-28-2018, 03:22 AM #6

It also fails when you connect the monitor cables directly to the GPU.

martims098
Member

193

12-28-2018, 08:57 AM

Reset the CMOS and then start with a single RAM stick. Did you leave the CPU power cables unplugged?

martims098

12-28-2018, 08:57 AM #7

Reset the CMOS and then start with a single RAM stick. Did you leave the CPU power cables unplugged?

ILoveeNarwhals
Junior Member

12-28-2018, 02:14 PM

All components are connected and functioning properly, yet starting only with a single RAM stick isn’t possible.

ILoveeNarwhals

12-28-2018, 02:14 PM #8

All components are connected and functioning properly, yet starting only with a single RAM stick isn’t possible.

ArceusHD
Member

154

12-30-2018, 12:07 AM

CMOS cleared as discussed, then all components reinstalled.

ArceusHD

12-30-2018, 12:07 AM #9

CMOS cleared as discussed, then all components reinstalled.

beta_wolf_boy
Junior Member

12-30-2018, 01:19 AM

#10

I have reinitialized the CMOS multiple times and completed all steps, yet the displays remain dark.

beta_wolf_boy

12-30-2018, 01:19 AM #10

I have reinitialized the CMOS multiple times and completed all steps, yet the displays remain dark.

Pages (2): 1 2 Next