F5F Stay Refreshed Hardware Desktop I don't know what to do either... need some help?

I don't know what to do either... need some help?

I don't know what to do either... need some help?

Pages (2): 1 2 Next
S
SenhorRoxinhas
Member
227
07-10-2022, 08:58 AM
#1
You're feeling frustrated, that's totally normal. It sounds like you've put a lot of effort into setting up your new PC, especially with the 4080 GPU. The fact that you're still getting only beeps and no screen after installation suggests there might be an issue with the motherboard or the BIOS settings. Since the 4080 is PCIe Gen 4, it should work in a Gen 5 slot too, but if it doesn't, it could point to a compatibility problem. Have you checked the CMOS reset or tried a different slot? Also, make sure the GPU is properly seated and that the BIOS is set to the correct version. If you're unsure, reaching out to a tech support person or a more experienced user might help resolve this.
S
SenhorRoxinhas
07-10-2022, 08:58 AM #1

You're feeling frustrated, that's totally normal. It sounds like you've put a lot of effort into setting up your new PC, especially with the 4080 GPU. The fact that you're still getting only beeps and no screen after installation suggests there might be an issue with the motherboard or the BIOS settings. Since the 4080 is PCIe Gen 4, it should work in a Gen 5 slot too, but if it doesn't, it could point to a compatibility problem. Have you checked the CMOS reset or tried a different slot? Also, make sure the GPU is properly seated and that the BIOS is set to the correct version. If you're unsure, reaching out to a tech support person or a more experienced user might help resolve this.

3
3gilad3
Senior Member
735
07-10-2022, 09:46 AM
#2
It seems you're checking if your setup works with the 13700K using its integrated GPU instead of a dedicated GPU.
3
3gilad3
07-10-2022, 09:46 AM #2

It seems you're checking if your setup works with the 13700K using its integrated GPU instead of a dedicated GPU.

S
SW_kail
Member
68
07-16-2022, 07:51 AM
#3
It worked perfectly with no issues or sounds...
S
SW_kail
07-16-2022, 07:51 AM #3

It worked perfectly with no issues or sounds...

N
Neidro
Senior Member
453
07-16-2022, 09:39 AM
#4
Additional confirmations requested. Have you used the RTX 4080 in a different setup before? Do you have another graphics card available for testing in the main slot? An alternative would be exploring PCIe 1.1, 2.0, or 3.0 versus the standard 4.0 with auto negotiation. There are known issues with the RTX 4090 where it has trouble negotiating certain PCIe versions, sometimes only being able to POST on PCIe 1.1.
N
Neidro
07-16-2022, 09:39 AM #4

Additional confirmations requested. Have you used the RTX 4080 in a different setup before? Do you have another graphics card available for testing in the main slot? An alternative would be exploring PCIe 1.1, 2.0, or 3.0 versus the standard 4.0 with auto negotiation. There are known issues with the RTX 4090 where it has trouble negotiating certain PCIe versions, sometimes only being able to POST on PCIe 1.1.

M
MarioGamerESP
Junior Member
49
07-22-2022, 11:58 PM
#5
Also check whether the card includes a Silent/OC toggle at the front, which can change between two distinct vBIOS versions with varying boost and fan settings. Relying on just one might lead to issues, so verifying the alternative EEPROM or firmware is wise.
M
MarioGamerESP
07-22-2022, 11:58 PM #5

Also check whether the card includes a Silent/OC toggle at the front, which can change between two distinct vBIOS versions with varying boost and fan settings. Relying on just one might lead to issues, so verifying the alternative EEPROM or firmware is wise.

U
UsagiK
Junior Member
49
07-27-2022, 11:29 AM
#6
I don't have any other PCs right now. I could run my old one, but it would take some time since I disassembled it. The case I have is the one from my new PC, which has a PCIe 3 slot—uncertain if that would work. I only have my 1070 GPU besides the 4080. Do you think this might be an issue? Would you like me to put it back at the top and test different settings to see what works? Because I did try changing it to Gen for before from auto mode.
U
UsagiK
07-27-2022, 11:29 AM #6

I don't have any other PCs right now. I could run my old one, but it would take some time since I disassembled it. The case I have is the one from my new PC, which has a PCIe 3 slot—uncertain if that would work. I only have my 1070 GPU besides the 4080. Do you think this might be an issue? Would you like me to put it back at the top and test different settings to see what works? Because I did try changing it to Gen for before from auto mode.

R
RafaelBP
Junior Member
21
07-27-2022, 03:51 PM
#7
It seems there are no visible buttons, perhaps you're having trouble seeing... LUL
R
RafaelBP
07-27-2022, 03:51 PM #7

It seems there are no visible buttons, perhaps you're having trouble seeing... LUL

A
arianed2001
Member
57
08-01-2022, 06:49 AM
#8
Typically near the GPU's motherboard edge
A
arianed2001
08-01-2022, 06:49 AM #8

Typically near the GPU's motherboard edge

M
MikeDragon159
Senior Member
661
08-01-2022, 08:29 AM
#9
It reminds me of the dual bios section—oh, maybe that's it! Sorry, I seem to be confused too.
M
MikeDragon159
08-01-2022, 08:29 AM #9

It reminds me of the dual bios section—oh, maybe that's it! Sorry, I seem to be confused too.

I
IzADerpCookie
Member
228
08-04-2022, 08:55 PM
#10
It seems you're checking if it's set to P mode, but the details are unclear. Could you clarify what you're referring to?
I
IzADerpCookie
08-04-2022, 08:55 PM #10

It seems you're checking if it's set to P mode, but the details are unclear. Could you clarify what you're referring to?

Pages (2): 1 2 Next