How to reach the web GUI of the Nokia G-010G-Q

Pages (3): 1 2 3 Next

sonic3003
Member

210

06-13-2023, 01:39 AM

I can send a ping to the ONT with "sudo arping 192.168.100.1" and the device responds. However, the device isn't reachable on any port. Running "sudo nmap -p0- -v -A -T4 192.168.100.1" shows activity but no ports are open. Using "wget", "ping", or "ftp" to the LAN causes the LED to blink, yet connections still fail. It appears there is no fiber connection.

sonic3003

06-13-2023, 01:39 AM #1

cor_bear
Member

246

06-17-2023, 12:00 AM

What exactly are you trying to do? Typically, there is no reason to access the ONT.
If you are having an issue, have you contacted your ISP?

cor_bear

06-17-2023, 12:00 AM #2

What exactly are you trying to do? Typically, there is no reason to access the ONT.
If you are having an issue, have you contacted your ISP?

MacSolaris
Senior Member

457

06-17-2023, 01:48 AM

when i can't access the ONT, i need another one. The problem seems to be that the web interface isn't reachable, and ssh/telnet works. Is my device's firmware faulty?

MacSolaris

06-17-2023, 01:48 AM #3

when i can't access the ONT, i need another one. The problem seems to be that the web interface isn't reachable, and ssh/telnet works. Is my device's firmware faulty?

a1k2
Member

06-23-2023, 01:00 AM

Is it still functioning properly (meaning sending the signal to its intended destination)?
Over the years with my fiber connection at home, I've never needed to check what the ONT was doing.
Router: yes. ONT: no.

a1k2

06-23-2023, 01:00 AM #4

Mystxic
Junior Member

07-13-2023, 09:22 PM

Same here. For @BlackMage2, why are you attempting to reach the ONT? What outcomes are you anticipating from there?

Mystxic

07-13-2023, 09:22 PM #5

Same here. For @BlackMage2, why are you attempting to reach the ONT? What outcomes are you anticipating from there?

Arnaer
Member

126

07-13-2023, 11:03 PM

... i attempt to configure my ONT... then I use my budget ZTE F601 on, the web interface from that device remains consistently usable.
Nokia G-010G-Q blocks access entirely.

Arnaer

07-13-2023, 11:03 PM #6

... i attempt to configure my ONT... then I use my budget ZTE F601 on, the web interface from that device remains consistently usable.
Nokia G-010G-Q blocks access entirely.

imrix123
Junior Member

07-20-2023, 11:38 PM

Typically, there is nothing for you to set up. Configuration is done by the ISP.

imrix123

07-20-2023, 11:38 PM #7

Typically, there is nothing for you to set up. Configuration is done by the ISP.

Lucas670
Junior Member

07-31-2023, 08:41 AM

This is a new thing you're trying to install and set up?
That is done by the ISP, and NEEDS input from them.

Lucas670

07-31-2023, 08:41 AM #8

This is a new thing you're trying to install and set up?
That is done by the ISP, and NEEDS input from them.

fayjaiKyle
Junior Member

08-08-2023, 12:45 PM

But I prefer having control over my internet connection. So I use my Zyxel PMG3000-D20B SFP.
I also want to check the monitor's internet status on another device. I need to see the GPON state and the optical power.

fayjaiKyle

08-08-2023, 12:45 PM #9

Djjeffy
Junior Member

08-10-2023, 12:45 AM

#10

The system requires an ONT matching your ISP's network setup.

Djjeffy

08-10-2023, 12:45 AM #10

The system requires an ONT matching your ISP's network setup.

Pages (3): 1 2 3 Next