F5F Stay Refreshed Software Operating Systems How to enter into bios on windows

How to enter into bios on windows

How to enter into bios on windows

C
CadeheLion
Member
179
11-20-2016, 06:45 AM
#1
You need to press Del to access the BIOS, otherwise Windows will start normally. Make sure you're using the right settings for your upgrade.
C
CadeheLion
11-20-2016, 06:45 AM #1

You need to press Del to access the BIOS, otherwise Windows will start normally. Make sure you're using the right settings for your upgrade.

P
Pinky2003x
Junior Member
13
11-28-2016, 10:09 AM
#2
Get that DEL button pressed right when you power on!
P
Pinky2003x
11-28-2016, 10:09 AM #2

Get that DEL button pressed right when you power on!

M
melchiah41
Junior Member
37
11-28-2016, 12:09 PM
#3
Ignore this message and don't click anything.
M
melchiah41
11-28-2016, 12:09 PM #3

Ignore this message and don't click anything.

A
Agman10
Senior Member
690
11-29-2016, 03:43 AM
#4
I messed up the keys on my Razer keyboard but it didn’t stop working.
A
Agman10
11-29-2016, 03:43 AM #4

I messed up the keys on my Razer keyboard but it didn’t stop working.

O
OffsetBadge
Member
191
11-29-2016, 04:51 AM
#5
Consider using a PS/2 connection if your motherboard allows it, or switch to a different USB keyboard.
O
OffsetBadge
11-29-2016, 04:51 AM #5

Consider using a PS/2 connection if your motherboard allows it, or switch to a different USB keyboard.

I
IkBenHetBram
Senior Member
735
11-30-2016, 04:21 AM
#6
Check if it supports USB3. If yes, switch to USB2. If only USB3 is available, disconnect and reconnect, then restart. Alternatively, connect via a PS/2 adapter.
I
IkBenHetBram
11-30-2016, 04:21 AM #6

Check if it supports USB3. If yes, switch to USB2. If only USB3 is available, disconnect and reconnect, then restart. Alternatively, connect via a PS/2 adapter.

L
LorenIsAMeme
Junior Member
1
12-06-2016, 09:21 PM
#7
Access BIOS or UEFI setup using standard steps: Power on the PC while the firmware initializes, then press F2 to enter. If the system boots quickly, remember to press F2 at the right moment. You can also reach UEFI settings through Windows 8 or 8.1.
L
LorenIsAMeme
12-06-2016, 09:21 PM #7

Access BIOS or UEFI setup using standard steps: Power on the PC while the firmware initializes, then press F2 to enter. If the system boots quickly, remember to press F2 at the right moment. You can also reach UEFI settings through Windows 8 or 8.1.

S
Slartix
Junior Member
3
12-07-2016, 04:39 AM
#8
If the previous method fails, consider using an alternative keyboard. Its detection depends on its capabilities, as some may lack proper bios recognition due to polling settings.
S
Slartix
12-07-2016, 04:39 AM #8

If the previous method fails, consider using an alternative keyboard. Its detection depends on its capabilities, as some may lack proper bios recognition due to polling settings.