Hmmm

Crazydog300
Senior Member

599

01-28-2016, 08:45 AM

I have an Intel i5 2400 with 8 GB RAM. I attempted to install a new RAM module but couldn’t boot. The modules I used are the same GSKILL Ripsaw DDR3 1333 1.5V chips. I’ve tried them in slot 1 and worked, but mixing one in slot 1 and one in slot 2 doesn’t let the PC start. I’ve adjusted settings without success.

Crazydog300

01-28-2016, 08:45 AM #1

Wqmb
Member

137

01-28-2016, 01:59 PM

Have you checked if it works just on the second track?

Wqmb

01-28-2016, 01:59 PM #2

Have you checked if it works just on the second track?

DangoBravo
Posting Freak

821

01-30-2016, 04:45 AM

I've already checked slot 2, it won't start up.

DangoBravo

01-30-2016, 04:45 AM #3

I've already checked slot 2, it won't start up.

Nabbazzo99
Junior Member

01-30-2016, 06:09 AM

The motherboard slot is probably no longer functioning, so it’s time to replace it.

Nabbazzo99

01-30-2016, 06:09 AM #4

The motherboard slot is probably no longer functioning, so it’s time to replace it.

nomegusta444
Member

131

01-30-2016, 07:51 AM

It should function as a fresh update.

nomegusta444

01-30-2016, 07:51 AM #5

It should function as a fresh update.

Niksaktus
Junior Member

01-30-2016, 08:18 AM

but it didn't? It seems like your motherboard, RAM module, or CPU might be the issue here. Your RAM modules look fine, and CPUs usually don’t get damaged, so the problem is probably the motherboard. You could try resetting its CMOS, but I’m not sure it will help.

Niksaktus

01-30-2016, 08:18 AM #6