F5F Stay Refreshed Hardware Desktop High idle temperatures on Ryzen 3600 even with a good cooler

High idle temperatures on Ryzen 3600 even with a good cooler

High idle temperatures on Ryzen 3600 even with a good cooler

Pages (3): 1 2 3 Next
K
Kurogano
Member
183
03-04-2019, 10:50 PM
#1
Good morning. Your setup shows strong thermal performance with the Ryzen 5 3600 and quiet cooler, but idle temps remain high at around 60°C. Even with optimization and energy-saving settings, the CPU draws only about 10W. Consider checking for dust buildup, ensuring proper airflow, or upgrading to a higher-end cooler if temperatures persist.
K
Kurogano
03-04-2019, 10:50 PM #1

Good morning. Your setup shows strong thermal performance with the Ryzen 5 3600 and quiet cooler, but idle temps remain high at around 60°C. Even with optimization and energy-saving settings, the CPU draws only about 10W. Consider checking for dust buildup, ensuring proper airflow, or upgrading to a higher-end cooler if temperatures persist.

P
73
03-13-2019, 10:23 AM
#2
Verify the CPU cooler installation. It might have been improperly seated or thermal paste was insufficient. Be cautious with pea size in the Rzyen 3000 series since not all components are centered on the die. 2. Determine the maximum load temperature. Typically, the 3600 operates within 1V to 1.475V under full load, which could also be a factor. If temperatures stay below 80°C during full load, it's acceptable.
P
PinkUniGamer15
03-13-2019, 10:23 AM #2

Verify the CPU cooler installation. It might have been improperly seated or thermal paste was insufficient. Be cautious with pea size in the Rzyen 3000 series since not all components are centered on the die. 2. Determine the maximum load temperature. Typically, the 3600 operates within 1V to 1.475V under full load, which could also be a factor. If temperatures stay below 80°C during full load, it's acceptable.

S
shadowbacca
Member
226
03-14-2019, 10:56 AM
#3
What BIOS and chipset drivers are installed? Are you using the Windows or Ryzen Balanced power plan? How is the airflow in your case?
S
shadowbacca
03-14-2019, 10:56 AM #3

What BIOS and chipset drivers are installed? Are you using the Windows or Ryzen Balanced power plan? How is the airflow in your case?

K
KristiCreeper
Junior Member
8
03-14-2019, 07:21 PM
#4
Verify your power configuration, for improved temperatures select balanced, or proceed with Ryzen high performance if you prefer lower temperatures.
K
KristiCreeper
03-14-2019, 07:21 PM #4

Verify your power configuration, for improved temperatures select balanced, or proceed with Ryzen high performance if you prefer lower temperatures.

J
JEFF_JEFFERSON
Senior Member
627
03-14-2019, 10:03 PM
#5
I believe the thermal paste is acceptable since I noticed slight bulges on its edges, except near the corners. I performed a visual inspection. Operating temperatures remain under 80°C even during maximum load, but with my present configuration the CPU operates at 3600 MHz and draws about 30W.
J
JEFF_JEFFERSON
03-14-2019, 10:03 PM #5

I believe the thermal paste is acceptable since I noticed slight bulges on its edges, except near the corners. I performed a visual inspection. Operating temperatures remain under 80°C even during maximum load, but with my present configuration the CPU operates at 3600 MHz and draws about 30W.

X
215
03-15-2019, 12:13 AM
#6
Airflow is working well and the cooler remains only mildly warm. I'm using the Ryzen Balanced power plan with the newest chipset drivers installed.
X
xXCoolIceBoyXx
03-15-2019, 12:13 AM #6

Airflow is working well and the cooler remains only mildly warm. I'm using the Ryzen Balanced power plan with the newest chipset drivers installed.

N
nebel75
Junior Member
41
03-15-2019, 12:49 AM
#7
You're using Ryzen Master and HWiNFO to monitor thermals. The issue might be with the BIOS, so check if you've installed the newest BIOS and chipset drivers.
N
nebel75
03-15-2019, 12:49 AM #7

You're using Ryzen Master and HWiNFO to monitor thermals. The issue might be with the BIOS, so check if you've installed the newest BIOS and chipset drivers.

L
217
03-15-2019, 06:49 AM
#8
It seems the CPU temperature doesn't seem to reach the cooler properly. I wondered if the connection might be loose or if the settings are too extreme. Could the memory module be faulty? Maybe the heat pipes aren't working well when it's below a certain point? Or is the chip not firmly attached to the heatsink? While I could turn off the fans, the temperature controls would likely be far from Asus's recommended values.
L
lol_Angela_lol
03-15-2019, 06:49 AM #8

It seems the CPU temperature doesn't seem to reach the cooler properly. I wondered if the connection might be loose or if the settings are too extreme. Could the memory module be faulty? Maybe the heat pipes aren't working well when it's below a certain point? Or is the chip not firmly attached to the heatsink? While I could turn off the fans, the temperature controls would likely be far from Asus's recommended values.

L
LukinhasPvP13
Member
68
03-15-2019, 08:23 AM
#9
I've got the most recent BIOS updates from Asus. The temperatures match what I see in both Bios and CPU-Z, which gives me confidence.
L
LukinhasPvP13
03-15-2019, 08:23 AM #9

I've got the most recent BIOS updates from Asus. The temperatures match what I see in both Bios and CPU-Z, which gives me confidence.

I
i3z___
Senior Member
559
03-17-2019, 05:23 AM
#10
It seems like you're wondering why Ryzen chips are typical. They are quite common in modern computing.
I
i3z___
03-17-2019, 05:23 AM #10

It seems like you're wondering why Ryzen chips are typical. They are quite common in modern computing.

Pages (3): 1 2 3 Next