F5F Stay Refreshed Hardware Desktop Game screen goes dark and system shuts down after 10 minutes of play

Game screen goes dark and system shuts down after 10 minutes of play

Game screen goes dark and system shuts down after 10 minutes of play

Pages (2): 1 2 Next
D
doc_boom
Member
51
05-01-2020, 10:25 PM
#1
Hello, I just moved from a 1070 to a 3070 using my i5 12400f with the original cooler. Despite that, I can't play more than 15 minutes without the whole system freezing. The screen turns black but the sound stays on. I heard the game crash and some system noises afterward. Eventually, I have to reset it manually. Any thoughts on what might be wrong? I ran a stress test at the same time, and temperatures were similar—GPU around 70-75, CPU 75-85 under load. Thanks in advance.
D
doc_boom
05-01-2020, 10:25 PM #1

Hello, I just moved from a 1070 to a 3070 using my i5 12400f with the original cooler. Despite that, I can't play more than 15 minutes without the whole system freezing. The screen turns black but the sound stays on. I heard the game crash and some system noises afterward. Eventually, I have to reset it manually. Any thoughts on what might be wrong? I ran a stress test at the same time, and temperatures were similar—GPU around 70-75, CPU 75-85 under load. Thanks in advance.

S
SmileyMae17
Member
66
05-01-2020, 11:45 PM
#2
Run CPU tests using Prime95 with Small FFTs for one hour. Perform RAM checks with Memtest86 for three hours. Assess GPU performance with GPUPI 3.3.3 by pressing Calculate and applying the specified settings. If issues arise during testing, report them. Download links provided: Prime95 – https://www.mersenne.org/download/, Memtest86 – https://www.memtest86.com/download.htm, GPUPI – https://www.overclockers.at/news/gpupi-i...ort-thread, MSI Kombustor – https://msikombustor.com/#MSI_Kombustor_Download_for_PC
S
SmileyMae17
05-01-2020, 11:45 PM #2

Run CPU tests using Prime95 with Small FFTs for one hour. Perform RAM checks with Memtest86 for three hours. Assess GPU performance with GPUPI 3.3.3 by pressing Calculate and applying the specified settings. If issues arise during testing, report them. Download links provided: Prime95 – https://www.mersenne.org/download/, Memtest86 – https://www.memtest86.com/download.htm, GPUPI – https://www.overclockers.at/news/gpupi-i...ort-thread, MSI Kombustor – https://msikombustor.com/#MSI_Kombustor_Download_for_PC

T
ThatOneGuy14
Member
157
05-04-2020, 10:10 PM
#3
Verify your PSU... The 30 series cards are recognized for surging PSU demands. Sometimes they exceed standard specs. 3070 needs a 650 min. However, with the spikes involved, the 30 series cards perform best around 800+ watts.
T
ThatOneGuy14
05-04-2020, 10:10 PM #3

Verify your PSU... The 30 series cards are recognized for surging PSU demands. Sometimes they exceed standard specs. 3070 needs a 650 min. However, with the spikes involved, the 30 series cards perform best around 800+ watts.

A
ash_n_brad
Posting Freak
778
05-05-2020, 10:25 PM
#4
I only have a 600W model. The calculator says 400W, which is a bit low. Could end up needing to invest more.
A
ash_n_brad
05-05-2020, 10:25 PM #4

I only have a 600W model. The calculator says 400W, which is a bit low. Could end up needing to invest more.

X
Xia3mi
Junior Member
17
05-08-2020, 10:07 PM
#5
Your 3070ti is running smoothly with a 650w PSU and no problems detected.
X
Xia3mi
05-08-2020, 10:07 PM #5

Your 3070ti is running smoothly with a 650w PSU and no problems detected.

O
oKratos
Junior Member
25
05-21-2020, 10:05 PM
#6
even beyond 600...
O
oKratos
05-21-2020, 10:05 PM #6

even beyond 600...

F
Fly4Win
Junior Member
40
05-21-2020, 10:19 PM
#7
You're experiencing the same issue with your 3070, and you've already shared a post about it.
F
Fly4Win
05-21-2020, 10:19 PM #7

You're experiencing the same issue with your 3070, and you've already shared a post about it.

L
Levraigateau
Junior Member
48
05-22-2020, 01:26 AM
#8
Recommended power rating is 650 watts. However, perform a Prime95 test afterward, followed by a furmark test. If it still doesn’t fail at once, verify temperatures consistently. Our aim is to trigger a restart and narrow down the issue.
L
Levraigateau
05-22-2020, 01:26 AM #8

Recommended power rating is 650 watts. However, perform a Prime95 test afterward, followed by a furmark test. If it still doesn’t fail at once, verify temperatures consistently. Our aim is to trigger a restart and narrow down the issue.

X
xFqtal_
Senior Member
670
05-22-2020, 06:58 AM
#9
Hey, I switched to a 750W power supply and a newer case with improved ventilation. However, after just two minutes during the latest stress test, it failed again. Check out the video for details on what’s happening consistently.
X
xFqtal_
05-22-2020, 06:58 AM #9

Hey, I switched to a 750W power supply and a newer case with improved ventilation. However, after just two minutes during the latest stress test, it failed again. Check out the video for details on what’s happening consistently.

B
by_Mxrv_
Junior Member
28
05-24-2020, 04:32 AM
#10
Currently, all signs point to a faulty GPU. Do you have a friend with a PC who might be able to test it?
B
by_Mxrv_
05-24-2020, 04:32 AM #10

Currently, all signs point to a faulty GPU. Do you have a friend with a PC who might be able to test it?

Pages (2): 1 2 Next