F5F Stay Refreshed Hardware Desktop Fixed the white LED lights issue in solvedEz.

Fixed the white LED lights issue in solvedEz.

Fixed the white LED lights issue in solvedEz.

Pages (2): 1 2 Next
C
Chester09
Senior Member
491
10-15-2018, 03:39 PM
#1
The LED for the graphics stays active, but it flashes briefly to the CPU LED and then quickly returns to the graphics LED. You might be misconfiguring the settings or timing. Check your BIOS or power management options. It could also depend on how the motherboard interprets the signals. For an MSI MPG Z390 Gaming PRO Carbon AC, consult the manual for specific guidance.
C
Chester09
10-15-2018, 03:39 PM #1

The LED for the graphics stays active, but it flashes briefly to the CPU LED and then quickly returns to the graphics LED. You might be misconfiguring the settings or timing. Check your BIOS or power management options. It could also depend on how the motherboard interprets the signals. For an MSI MPG Z390 Gaming PRO Carbon AC, consult the manual for specific guidance.

N
NaviPixel
Member
68
10-16-2018, 01:46 PM
#2
The system waits for a short period—about 2 to 3 minutes—to see if you're ready. This might help with memory training. Do you have any additional system details?
N
NaviPixel
10-16-2018, 01:46 PM #2

The system waits for a short period—about 2 to 3 minutes—to see if you're ready. This might help with memory training. Do you have any additional system details?

T
TehStratosHD
Senior Member
492
10-16-2018, 01:51 PM
#3
The setup remains unresponsive for roughly two minutes before the machine powers down. Your hardware includes an Intel core i7-9700k, Corsair Vengeance LX 16GB, Asus ROG Strix GeForce RTX 2080 Super, Seagate 2TB, Samsung 970 Evo Plus with 500GB SSD, and an EVGA Supernova 650 G3. You also have a Corsair iCUE H100i RGB Pro XT.
T
TehStratosHD
10-16-2018, 01:51 PM #3

The setup remains unresponsive for roughly two minutes before the machine powers down. Your hardware includes an Intel core i7-9700k, Corsair Vengeance LX 16GB, Asus ROG Strix GeForce RTX 2080 Super, Seagate 2TB, Samsung 970 Evo Plus with 500GB SSD, and an EVGA Supernova 650 G3. You also have a Corsair iCUE H100i RGB Pro XT.

G
GameKnight63
Junior Member
2
10-18-2018, 11:44 AM
#4
However, it isn't linked in any way. One more point I overlooked was that I purchased the motherboard myself.
G
GameKnight63
10-18-2018, 11:44 AM #4

However, it isn't linked in any way. One more point I overlooked was that I purchased the motherboard myself.

J
julien190901
Member
192
10-18-2018, 03:33 PM
#5
The memory setup on the motherboard is managed through its BIOS settings, and you can check if it was recently cleared by consulting the manufacturer’s documentation or using a memory diagnostic tool.
J
julien190901
10-18-2018, 03:33 PM #5

The memory setup on the motherboard is managed through its BIOS settings, and you can check if it was recently cleared by consulting the manufacturer’s documentation or using a memory diagnostic tool.

S
Santonite
Member
208
10-18-2018, 11:45 PM
#6
The data is placed in slots 2 and 4 correctly. I’m not sure how to reset the CMOS. This is my initial attempt at assembling a PC.
S
Santonite
10-18-2018, 11:45 PM #6

The data is placed in slots 2 and 4 correctly. I’m not sure how to reset the CMOS. This is my initial attempt at assembling a PC.

V
Venpirman
Member
219
10-19-2018, 04:27 AM
#7
Interesting. First impression not great, but it’s a good start. Building it was enjoyable, though not as much after the first time. No excitement afterward. Currently using mobile. Here’s the support link: https://www.msi.com/Motherboard/support/...own-manual
V
Venpirman
10-19-2018, 04:27 AM #7

Interesting. First impression not great, but it’s a good start. Building it was enjoyable, though not as much after the first time. No excitement afterward. Currently using mobile. Here’s the support link: https://www.msi.com/Motherboard/support/...own-manual

B
Batai22
Member
184
10-19-2018, 05:43 AM
#8
They recommend using a jumper cap to cover jbat1 for 5 to 10 minutes. If you can't find one, look for an alternative method to block the area.
B
Batai22
10-19-2018, 05:43 AM #8

They recommend using a jumper cap to cover jbat1 for 5 to 10 minutes. If you can't find one, look for an alternative method to block the area.

R
Rosario17_
Posting Freak
897
10-23-2018, 05:13 AM
#9
Contact the two pins using a metal object for 5 to 10 seconds.
R
Rosario17_
10-23-2018, 05:13 AM #9

Contact the two pins using a metal object for 5 to 10 seconds.

H
HB_FlexyFlo
Junior Member
2
10-23-2018, 05:26 AM
#10
I gently pressed the two pins with a metal object for roughly ten seconds, yet the issue remained unchanged.
H
HB_FlexyFlo
10-23-2018, 05:26 AM #10

I gently pressed the two pins with a metal object for roughly ten seconds, yet the issue remained unchanged.

Pages (2): 1 2 Next