Fix for frequent game crashes, please assist.
Fix for frequent game crashes, please assist.
I assembled my own PC in July, and since then I’ve experienced significant misfortune with game crashes leading to a desktop restart and sporadic Blue Screen of Death (BSOD) errors. My system specifications are as follows:
Processor: Ryzen 3600
Graphics Card: NVIDIA GeForce GTX 1660 Ti
Memory: Crucial Ballistix Sport LT 3200 MHz DDR4 CL 16 8GB (2x4GB) – [https://www.amazon.com/gp/product/B07MNJ...UTF8&psc=1](https://www.amazon.com/gp/product/B07MNJ...UTF8&psc=1)
Solid State Drive: Intel 660p M.2 1TB
Motherboard: ASRock B450 Pro4
Power Supply Unit: EVGA 500W Bronze
Operating System: Windows 10 Pro
Initially, I encountered numerous BSODs upon initial setup, but most were resolved after updating the BIOS to version 3.50 released by ASRock. Since then, I’ve been randomly crashing while playing various computer games, occasionally accompanied by a BSOD. Interestingly, certain games are less prone to crashing, likely due to their lower graphical demands (for example, Counter-Strike: Global Offensive is relatively stable). However, reducing graphics settings to the lowest level hasn't significantly alleviated the issue.
I suspect that my RAM may be the source of the problem, though I lack sufficient computer knowledge to definitively confirm this. My RAM has a rated speed of 3200 MHz but is currently running at 2400 MHz in the BIOS. I did observe an increase in crashes when attempting 3200 MHz. I performed multiple runs of Memtest86, which revealed no errors. All Windows and GPU drivers are current. I previously assessed my CPU and GPU for thermal performance, but I cannot recall the specific temperatures or programs used; I am willing to re-evaluate this.
I’m quite frustrated with this situation as I don't understand what is causing these problems. Any assistance would be greatly appreciated. I am prepared to conduct a comprehensive series of tests. Finally, ASRock has released a new BIOS update for my motherboard (version 3.60), and I am considering installing it to see if it resolves the issue before proceeding.
Thank you for your time and support.
Wattage is unfortunately irrelevant when quality isn't there, as being suggested above.
A GPU could run perfectly fine on a good quality 550W, but not a bad quality one for example.
If you're on hardware diagnosis now (being as clean installs didn't help) a start is to run through some of these:
RAM:
https://www.sysnative.com/forums/threads...t86.24300/
Storage:
https://www.sysnative.com/forums/threads...test.4072/
CPU:
https://www.sysnative.com/forums/th...nd...ipdt.3908/
PSU...
Please refer to the attached BSOD document in my profile for instructions on how to format posts when experiencing Blue Screen of Death errors.
Since the BSOD appeared initially, it would be beneficial to examine the dump files (detailed in the referenced guide) to investigate this problem further. If this happened after a new installation, it may indicate a hardware problem or a problematic driver causing instability. However, analyzing the dump file and stop codes could provide more specific information.
Could you please describe your memory testing process? Did you perform at least four passes with memtest?
What are the maximum temperatures your CPU and GPU have reached?
Are you utilizing the most recent motherboard/chipset drivers?
The file contains detailed information regarding a project, including timelines, tasks, and associated documentation for its completion. It outlines the key steps involved in developing and launching the product, with specific attention to resource allocation and potential challenges. The document serves as a comprehensive guide for all stakeholders involved in the endeavor.
Error Code 139, {1e, fffff8073fe678f0, fffff8073fe67848, 0}
***** The debugger couldn't locate any modules within the module list, potentially due to a corrupted list and resulting error 0x80070057.
It appears the module listing is damaged, preventing examination of drivers while also suggesting a possible hardware issue.
MODULE_NAME: Unknown_Module
IMAGE_NAME: Unknown_Image
The system cannot identify modules because of this corruption.
WARNING: Page directory reset failed.
# Child-SP RetAddr : Arguments to Child : Call Site
00 fffff807`3fe675c8 fffff807`3bdd32e9 : 00000000`00000139 00000000`0000001e fffff807`3fe678f0 fffff807`3fe67848 : 0xfffff807`3bdc14e0
01 fffff807`3fe675d0 00000000`00000139 : 00000000`0000001e fffff807`3fe678f0 fffff807`3fe67848 00000000`00000000 : 0xfffff807`3bdd32e9
02 fffff807`3fe675d8 00000000`0000001e : fffff807`3fe678f0 fffff807`3fe67848 00000000`00000000 ffff8505`c692fac0 : 0x139
03 fffff807`3fe675e0 fffff807`3fe678f0 : fffff807`3fe67848 00000000`00000000 ffff8505`c692fac0 00000000`00000000 : 0x1e
04 fffff807`3fe675e8 fffff807`3fe67848 : 00000000`00000000 ffff8505`c692fac0 00000000`00000000 00000000`00000000 : 0xfffff807`3fe678f0
05 fffff807`3fe675f0 00000000`00000000 : ffff8505`c692fac0 00000000`00000000 00000000`00000000 00000000`00000000 : 0xfffff807`3fe67848
This might be a failed attempt to analyze a problematic data file, possibly involving an unsuccessful effort to extract information from a damaged source. Based on the details provided, it's likely a problem with either the hardware or the core operating system.
Have you performed memory tests? Specifically, have you run them for at least four passes? I recommend following this testing guide:
Testing RAM
What maximum temperatures are your CPU and GPU reaching?
Can you identify the exact model of your power supply unit (PSU)?
I would also suggest running diagnostic tests on your storage drives:
Testing Storage Guide
Has this issue arisen since you initially received the computer?
Did some gaming to test.
Max GPU temp: 70C
Max CPU temp: 75C
As for memtest I did at least 4 passes. I also used Windows memory diagnostic tool more recently and it was normal.
PSU model:
https://www.amazon.com/gp/product/B07DTM...UTF8&psc=1
And yes this has been happening since July when I built the computer.
If this is hardware issues, what are the most likely culprits? RAM? SSD? I might just start replacing parts since at this point it would be less painful to just eat the cost rather than diagnose and solve this.
I will work on the storage guide when I can. Thank you again for all of the help.
No way to tell based on the errors. One would likely suspect things like RAM and Storage, however remember that these are controlled by your other components, so it's hard to trace exactly where it comes from in these types of errors. The PSU is not great quality that's for sure, which can equally cause issues. Have you tried clean installing windows as per this guide also: https://forums. Have you run the storage drive tests yet?
I evaluated the hard drive; the SSD yielded a “PASS” result using the extended diagnostic. Subsequently, I plan to attempt a fresh installation. I’ll need to purchase a new storage unit for backing up my data, which could take several days.
Do you believe the system instability is related to the RAM clock speed in my computer's BIOS? As previously mentioned, it’s presently set at 2400 MHz, and I am uncertain of the ideal value. I’ve experimented with multiple speeds – 4-5 different settings – but they all produce the same crashes.
It’s probably not the case, though if it was failing at slower rates, I would suspect the memory might be defective, rather than just the clock speed being an issue. Both the RAM and motherboard should operate at their specified pace, so there wouldn’t typically be a substantial problem.
My BIOS was recently modified, but the system continues to crash.
I attempted a clean Windows 10 installation, however, the computer repeatedly crashed during the process – as it has previously done. The issue persists even after reinstalling onto both the SSD and HDD. I also swapped out the RAM modules, yet the crashes continue.
I believe the motherboard is the source of the problem... although you indicated my power supply isn’t optimal, my graphics card suggests a 450W requirement and I have a 500W unit, which should be sufficient for a Windows installation, correct?