F5F Stay Refreshed Hardware Desktop Fans rotate silently without any screen.

Fans rotate silently without any screen.

Fans rotate silently without any screen.

Pages (2): 1 2 Next
P
Pvpingbacca
Member
67
11-13-2016, 06:44 PM
#1
I've been working on this problem for several hours and still can't identify the cause. The motherboard shows post status lights indicating faulty bits. When powering up, both the DRAM and CPU indicators light up red. I've reinserted the RAM and CPU, confirmed the CPU receives power, and tested different RAM sticks one by one. Since no storage devices are connected, I'm concerned a failing drive might be preventing booting. The CPU is listed as supported in OOTB according to the documentation. I'm feeling really confused and stuck. I've assembled computers before, but this situation is especially frustrating and unclear.
P
Pvpingbacca
11-13-2016, 06:44 PM #1

I've been working on this problem for several hours and still can't identify the cause. The motherboard shows post status lights indicating faulty bits. When powering up, both the DRAM and CPU indicators light up red. I've reinserted the RAM and CPU, confirmed the CPU receives power, and tested different RAM sticks one by one. Since no storage devices are connected, I'm concerned a failing drive might be preventing booting. The CPU is listed as supported in OOTB according to the documentation. I'm feeling really confused and stuck. I've assembled computers before, but this situation is especially frustrating and unclear.

D
DanBarr2
Member
138
11-18-2016, 12:45 AM
#2
Yes, I checked if the RAM was properly connected.
D
DanBarr2
11-18-2016, 12:45 AM #2

Yes, I checked if the RAM was properly connected.

P
plumhead123
Member
61
11-18-2016, 04:42 PM
#3
I confirmed in my previous message that I replaced the RAM modules and tested each one separately within its respective socket.
P
plumhead123
11-18-2016, 04:42 PM #3

I confirmed in my previous message that I replaced the RAM modules and tested each one separately within its respective socket.

T
Tonelarone
Junior Member
30
11-18-2016, 10:56 PM
#4
This update is a fresh release, not an existing version.
T
Tonelarone
11-18-2016, 10:56 PM #4

This update is a fresh release, not an existing version.

M
MadMats100
Member
129
11-25-2016, 05:49 AM
#5
New build, sorry.
M
MadMats100
11-25-2016, 05:49 AM #5

New build, sorry.

M
MasterDecisive
Junior Member
22
11-25-2016, 06:03 AM
#6
Are you sure the graphics card is properly connected? From what I understand, the R7X doesn’t support an integrated GPU, which could affect performance.
M
MasterDecisive
11-25-2016, 06:03 AM #6

Are you sure the graphics card is properly connected? From what I understand, the R7X doesn’t support an integrated GPU, which could affect performance.

A
Acryn
Junior Member
10
11-25-2016, 08:01 AM
#7
I possess an RTX 3060 but it hasn't been set up yet since I'm focusing on reducing potential issues at every level
A
Acryn
11-25-2016, 08:01 AM #7

I possess an RTX 3060 but it hasn't been set up yet since I'm focusing on reducing potential issues at every level

J
jerrydog01
Senior Member
703
11-25-2016, 09:13 AM
#8
Yes, it performs the same action when installed.
J
jerrydog01
11-25-2016, 09:13 AM #8

Yes, it performs the same action when installed.

O
ohRealize
Member
71
11-25-2016, 10:25 AM
#9
I've attempted both methods and checked if the video reached the integrated chip during installation with the external card, but no output was received from either.
O
ohRealize
11-25-2016, 10:25 AM #9

I've attempted both methods and checked if the video reached the integrated chip during installation with the external card, but no output was received from either.

M
Micky_CT
Member
146
12-01-2016, 03:47 AM
#10
Consider relocating the clear CMOS jumper and performing a power cycle to determine its impact.
M
Micky_CT
12-01-2016, 03:47 AM #10

Consider relocating the clear CMOS jumper and performing a power cycle to determine its impact.

Pages (2): 1 2 Next