F5F Stay Refreshed Hardware Desktop Experiencing problems with CTD and RTX 3080 graphics card.

Experiencing problems with CTD and RTX 3080 graphics card.

Experiencing problems with CTD and RTX 3080 graphics card.

Pages (3): Previous 1 2 3 Next
K
KewlDerp
Member
54
02-16-2020, 07:32 AM
#11
It seems the power supply is quite capable, matching the S tier on the forum list. Running several games without problems has been possible, especially under heavy loads like Tiny Tina's Wonderlands. I tested it by running Furmark with Prime95 for two hours after installing the graphics card, confirming it handled the demand. A BSOD only appeared when Chrome was open, leaving no strain on the GPU or CPU. When switching to an RTX 3080, I managed to play BO4 for hours without any issues, and many others have achieved similar results with lower wattage units.
K
KewlDerp
02-16-2020, 07:32 AM #11

It seems the power supply is quite capable, matching the S tier on the forum list. Running several games without problems has been possible, especially under heavy loads like Tiny Tina's Wonderlands. I tested it by running Furmark with Prime95 for two hours after installing the graphics card, confirming it handled the demand. A BSOD only appeared when Chrome was open, leaving no strain on the GPU or CPU. When switching to an RTX 3080, I managed to play BO4 for hours without any issues, and many others have achieved similar results with lower wattage units.

J
JacobKZombie
Junior Member
5
02-16-2020, 08:06 AM
#12
atkexComSvc.exe = Motherboard Utility SamsungMagicianSVC.exe = Any Samsung software you have installed You might consider reducing memory speed. I think 4x8gb is a bit too much for a Ryzen CPU to handle. Two options: lower the frequency (try setting it manually at 2933 while XMP is active) Or adjust timings and increase voltage slightly. 1.370v can help avoid droop. For certain games, turn off "multi-core rendering" and "post processing" to see if performance improves a bit.
J
JacobKZombie
02-16-2020, 08:06 AM #12

atkexComSvc.exe = Motherboard Utility SamsungMagicianSVC.exe = Any Samsung software you have installed You might consider reducing memory speed. I think 4x8gb is a bit too much for a Ryzen CPU to handle. Two options: lower the frequency (try setting it manually at 2933 while XMP is active) Or adjust timings and increase voltage slightly. 1.370v can help avoid droop. For certain games, turn off "multi-core rendering" and "post processing" to see if performance improves a bit.

R
Ramonster00
Junior Member
44
02-16-2020, 07:11 PM
#13
Could cutting back on RAM by two sticks make a difference? I’m not really relying on 32 gigabytes, just focusing on gaming. If I sell the extra unit I already have, it might be worth considering. I bought two of the same set and installed them together.
R
Ramonster00
02-16-2020, 07:11 PM #13

Could cutting back on RAM by two sticks make a difference? I’m not really relying on 32 gigabytes, just focusing on gaming. If I sell the extra unit I already have, it might be worth considering. I bought two of the same set and installed them together.

T
147
02-16-2020, 07:48 PM
#14
Sure, that's a valid choice. We'll find out more after some testing, right?
T
TannerBannaner
02-16-2020, 07:48 PM #14

Sure, that's a valid choice. We'll find out more after some testing, right?

C
Crazydog300
Senior Member
599
02-18-2020, 04:41 PM
#15
It's simple to try, and if it works for your issue, that's enough. If not, it's still okay.
C
Crazydog300
02-18-2020, 04:41 PM #15

It's simple to try, and if it works for your issue, that's enough. If not, it's still okay.

S
SuliGhost
Junior Member
5
02-20-2020, 09:17 AM
#16
I reduced the memory speed and increased the voltage, but it didn’t help. I then used only two sticks and still faced issues. I contacted MSI who said something is definitely wrong with the board. I’m planning to return the board for an RMA and keep the Asus B550 Strix as a backup once it’s replaced. I also ordered an Asus B550 Strix and a Seasonic Focus 850w 80+ Gold to rule out power supply problems, hoping the new board will work better. I’ll either keep the MSI board after it’s repaired or sell it to recover my investment once it functions properly. Thanks for your assistance!
S
SuliGhost
02-20-2020, 09:17 AM #16

I reduced the memory speed and increased the voltage, but it didn’t help. I then used only two sticks and still faced issues. I contacted MSI who said something is definitely wrong with the board. I’m planning to return the board for an RMA and keep the Asus B550 Strix as a backup once it’s replaced. I also ordered an Asus B550 Strix and a Seasonic Focus 850w 80+ Gold to rule out power supply problems, hoping the new board will work better. I’ll either keep the MSI board after it’s repaired or sell it to recover my investment once it functions properly. Thanks for your assistance!

G
genis260
Member
53
02-22-2020, 06:08 AM
#17
They clearly understand their equipment better than anyone else, making it a worthwhile watch.
G
genis260
02-22-2020, 06:08 AM #17

They clearly understand their equipment better than anyone else, making it a worthwhile watch.

R
rendy_mario
Junior Member
10
02-27-2020, 08:52 AM
#18
I really thought this whole situation would deter me from purchasing MSI motherboards, particularly regarding the RMA process. It seems more widespread in the PC industry than I realized, but I've never noticed a company charging customers for shipping labels. Usually they just send an email with a label, which still confuses me. Maybe this is becoming more common?
R
rendy_mario
02-27-2020, 08:52 AM #18

I really thought this whole situation would deter me from purchasing MSI motherboards, particularly regarding the RMA process. It seems more widespread in the PC industry than I realized, but I've never noticed a company charging customers for shipping labels. Usually they just send an email with a label, which still confuses me. Maybe this is becoming more common?

G
goldfish309
Junior Member
2
02-27-2020, 10:09 AM
#19
It's a bit outdated and lacking polish, yet it's not entirely surprising. Consider it extra effort to discourage customers from initiating returns. Honestly, I think they should offer stronger initial support that can handle that pressure and absorb shipping costs... though perhaps their financial teams manage more complex situations now.
G
goldfish309
02-27-2020, 10:09 AM #19

It's a bit outdated and lacking polish, yet it's not entirely surprising. Consider it extra effort to discourage customers from initiating returns. Honestly, I think they should offer stronger initial support that can handle that pressure and absorb shipping costs... though perhaps their financial teams manage more complex situations now.

K
kocuricek
Junior Member
12
03-03-2020, 10:12 PM
#20
They claim the motherboard is faulty and it's covered under warranty, yet they’re asking you to cover shipping costs? That seems questionable. If the product is no longer covered, it makes sense to proceed without extra charges. Edited June 22, 2022 by Bombastinator
K
kocuricek
03-03-2020, 10:12 PM #20

They claim the motherboard is faulty and it's covered under warranty, yet they’re asking you to cover shipping costs? That seems questionable. If the product is no longer covered, it makes sense to proceed without extra charges. Edited June 22, 2022 by Bombastinator

Pages (3): Previous 1 2 3 Next