Executing CLOCK_WATCHDOG_TIMEOUT multiple times consistently.
Executing CLOCK_WATCHDOG_TIMEOUT multiple times consistently.
One Clock_Watchdog crash indicates a page fault problem, usually linked to RAM. However, RAM issues tend to produce varied errors and blame different processes, making consistency unusual. The CPU remains the strongest clue, though a faulty memory controller could explain the uniform behavior in recent dumps. A crash during a Windows install strongly suggests a hardware fault.
It's happening in safe mode means the data is intact. Safe mode removes many components such as user drivers. It can encounter hardware problems and might cost a lot if your equipment isn<|pad|>, especially without warranty coverage. The thumb drive test verifies storage capacity. Edited June 17, 2023 by Bombastinator
It appears there might be a hardware problem based on your observations from @Bombastinator and @Bjoolz. I've conducted several memory tests and checked the RAM, including stress tests like using one stick. According to my assessment, the motherboard is likely the culprit (about 70% probability) and possibly the PSU. However, many have mentioned the PSU isn't the issue (though they can offer more insight). My motherboard and CPU are brand new, so warranty coverage isn't a concern. I plan to replace the motherboard on Monday and will bring the CPU over as well.
On the 14th, I brought my system to a store where they tested it on their bench. Through trial and error, they identified the GPU as the problem after swapping components. They noted an IRQL error occurred when the GPU was reinstalled. I sent my RX 6600 XT for replacement since it's still under warranty, and a new GPU will arrive soon.
Today, I tried running the system with my spare GT 1030, and the Minidump errors appeared. This suggests a GPU fault, but I'm still planning to get a new one anyway. My main concern is the PSU—my Corsair VS450 (80W, 450W rating) seems insufficient given the load from the RX 6600 XT, 5600, RGB strips, and three drives. I'm considering upgrading to a cheaper 650W 80+ bronze PSU, but I want your thoughts on this.
I'll monitor the situation on Monday and will update you about any changes, especially regarding the motherboard or CPU. Thank you for all the advice and keep sharing your findings!
You're referring to issues with your storage devices and the system. It seems the problem occurred even before installing the new M.2 SSD, suggesting it's not related to your drives themselves.
It serves as a verification method, but other tests have already confirmed similar behavior. At this stage, it seems to only assess the cabling and would function without a powered drive, leaving USB as the sole option. Its usefulness is limited right now. I’m mainly suspecting the motherboard is involved, given the variety of components on it. My understanding of the RAM is based on a crash occurring after boot, often linked to RAM failure. I know little about the power supply unit beyond it being relatively small. This isn’t usually the sign of a PSU issue, which typically triggers a distinct ‘click’ before shutdown. Was the replacement done during the motherboard swap? If not, how long has it been running?
Edited June 17, 2023 by Bombastinator