F5F Stay Refreshed Hardware Desktop Ensure the PC isn't automatically restarting every day.

Ensure the PC isn't automatically restarting every day.

Ensure the PC isn't automatically restarting every day.

I
136
01-09-2019, 02:42 AM
#1
your desktop went black with intense fans spinning. you're running an AMD Ryzen 7 5700G on a Gigabyte B450M DS3H, and you've tried different RAM configurations—1x16, 2x16, and your usual 2x. after clearing the CMOS twice, you see lights and fans but no display or boot errors. you're planning to install a B550M DS3H AC later this month to check for other issues. I've removed RAM and CPUs to test further. At the time, I also lost the ability to force a hard reset using the power button. any advice would be appreciated.
I
iIPotatoChipIi
01-09-2019, 02:42 AM #1

your desktop went black with intense fans spinning. you're running an AMD Ryzen 7 5700G on a Gigabyte B450M DS3H, and you've tried different RAM configurations—1x16, 2x16, and your usual 2x. after clearing the CMOS twice, you see lights and fans but no display or boot errors. you're planning to install a B550M DS3H AC later this month to check for other issues. I've removed RAM and CPUs to test further. At the time, I also lost the ability to force a hard reset using the power button. any advice would be appreciated.

E
Equant
Junior Member
42
01-09-2019, 04:27 AM
#2
this happened to me, the gpu is sadly might be doomed. There is a chance it’s not though. Unplug your gpu power cable and inspect it, look for broken/ melted pins. if you see any, it might work with a new cable. if you see dust clean it. plug it back in. Lmk what happens
E
Equant
01-09-2019, 04:27 AM #2

this happened to me, the gpu is sadly might be doomed. There is a chance it’s not though. Unplug your gpu power cable and inspect it, look for broken/ melted pins. if you see any, it might work with a new cable. if you see dust clean it. plug it back in. Lmk what happens

M
MYSTIQUE12
Junior Member
27
01-28-2019, 07:17 AM
#3
No problem, I've added graphics support. The GPU should handle the display now.
M
MYSTIQUE12
01-28-2019, 07:17 AM #3

No problem, I've added graphics support. The GPU should handle the display now.

D
Directioner158
Junior Member
21
01-30-2019, 04:00 AM
#4
tested a Ryzen 5 2400G with built-in graphics and got the same outcome
D
Directioner158
01-30-2019, 04:00 AM #4

tested a Ryzen 5 2400G with built-in graphics and got the same outcome

D
Damien1019
Member
185
02-01-2019, 01:14 PM
#5
It seems like the issue might be related to a dead motherboard or lack of sufficient power.
D
Damien1019
02-01-2019, 01:14 PM #5

It seems like the issue might be related to a dead motherboard or lack of sufficient power.

Y
ylyes4
Senior Member
572
02-01-2019, 04:10 PM
#6
I plan to test a different PSU setting—using a Vtx 600 with a whisper 450 configuration, excluding the GPU.
Y
ylyes4
02-01-2019, 04:10 PM #6

I plan to test a different PSU setting—using a Vtx 600 with a whisper 450 configuration, excluding the GPU.

C
catlover101
Junior Member
31
02-01-2019, 09:08 PM
#7
Same problem persists with a new MB motherboard and PSU. The BIOS screen appears, indicating an ongoing issue.
C
catlover101
02-01-2019, 09:08 PM #7

Same problem persists with a new MB motherboard and PSU. The BIOS screen appears, indicating an ongoing issue.

C
CloverGreen_
Member
98
02-14-2019, 12:29 PM
#8
Probably I’d reach out to Gigabyte to check your eligibility for a warranty.
C
CloverGreen_
02-14-2019, 12:29 PM #8

Probably I’d reach out to Gigabyte to check your eligibility for a warranty.