D.O.C.P functionality failed. System is in safe mode.

Pages (2): 1 2 Next

MettaloCaft
Senior Member

396

06-03-2018, 01:34 AM

Updated my setup to the following configuration: Asus Prime X-470 Pro, Ryzen 2700x, Trident Z 3000 2x8 at 3000MHz (clocked at 2133). After flashing the BIOS to the latest version (4024, dated 9/7/2018), I noticed my RAM was only showing a speed of 2133, not the rated 3000. I attempted to adjust timings, speeds, and voltages via DOCP settings, but the system keeps entering safe mode and reverting changes. My RAM modules are installed on A1 and B1. Someone, could you assist me?

MettaloCaft

06-03-2018, 01:34 AM #1

Yasuo
Member

06-17-2018, 01:43 PM

Use Bios Version 4018 instead

Yasuo

06-17-2018, 01:43 PM #2

Use Bios Version 4018 instead

Kstrahm
Junior Member

06-17-2018, 02:52 PM

Right now it's running smoothly. There seems to be an issue with the BIOS and RAM after version 4018.

Kstrahm

06-17-2018, 02:52 PM #3

Right now it's running smoothly. There seems to be an issue with the BIOS and RAM after version 4018.

kingjuul
Junior Member

06-17-2018, 11:49 PM

I accessed 4018 and attempted DOCP but got no response. I’ll input the timing voltage and speed manually. If that fails, let me know what steps you’d consider next.

kingjuul

06-17-2018, 11:49 PM #4

I accessed 4018 and attempted DOCP but got no response. I’ll input the timing voltage and speed manually. If that fails, let me know what steps you’d consider next.

Qwinz
Junior Member

06-18-2018, 05:49 AM

Manual and DOCP failed post-update to version 4018. Are there other solutions?

Qwinz

06-18-2018, 05:49 AM #5

Manual and DOCP failed post-update to version 4018. Are there other solutions?

JMathias23
Junior Member

06-21-2018, 07:17 PM

Turn the cards face down and shuffle them again.

JMathias23

06-21-2018, 07:17 PM #6

Turn the cards face down and shuffle them again.

AthenasLight
Posting Freak

781

07-13-2018, 03:49 PM

Consider placing them in A2/B2 instead of DIMMS a1b1. Alternatively, you could simply put them in the opposites.

AthenasLight

07-13-2018, 03:49 PM #7

Consider placing them in A2/B2 instead of DIMMS a1b1. Alternatively, you could simply put them in the opposites.

zmanrules987
Member

218

07-13-2018, 08:40 PM

I meant something different, but you're welcome to test both options. I've helped resolve boot problems before.

zmanrules987

07-13-2018, 08:40 PM #8

I meant something different, but you're welcome to test both options. I've helped resolve boot problems before.

AwsomeFace2
Member

202

07-14-2018, 03:51 AM

Starting from 2133 isn't the issue—I'm just attempting DOCP or manual OC now. But I'll give it a shot.

AwsomeFace2

07-14-2018, 03:51 AM #9

Starting from 2133 isn't the issue—I'm just attempting DOCP or manual OC now. But I'll give it a shot.

luka231
Junior Member

07-14-2018, 07:36 AM

#10

It's hard to believe the change made a difference. Appreciate the clear and useful guidance!

luka231

07-14-2018, 07:36 AM #10

It's hard to believe the change made a difference. Appreciate the clear and useful guidance!

Pages (2): 1 2 Next