DH57JG refuses to take keyboard input at the end of the process.
DH57JG refuses to take keyboard input at the end of the process.
Press F2 continuously from the moment you press the power button. Follow the suggested configuration on page 51 of the manual for jumper position (pins 2 and 3). Regrettably, I can't confirm if another keyboard is available. If this fails, consider flashing the BIOS via recovery mode. Remove the jumper, download the latest BIOS file from the provided link, and insert a blank FAT32 USB drive with the *.bio file. The process should auto-start. Edit: Finding the correct BIOS link took time, so I wrote this sooner than others suggested. For best results, use a space USB drive you’re comfortable formatting. Edit2: Official instructions available at the Intel support page, summarizing the steps clearly.
I think when the system finds no boot drive it switches into configuration mode. The display remains consistent whether the jumper is placed on either set of pins. I'm looking for a unit, but I only have an older G610 Orion and a 2011 Apple Keyboard from the video.
I revised my update after your comment, checking it on the Intel website. Consider the advice I gave in my edit and observe if it helps—0663 is the latest BIOS for your board, originally released around 2011.
In repair work, you mostly encounter their problems. I frequently see broken computers, and aside from total system crashes, it’s usually the user who’s to blame for mishandling the device. Of course, I never say that out loud.
It seems you're expecting a specific display but only see this part. The "5A" likely refers to a detail in the lower-right corner, but more context would help clarify what you're looking for.