DH57JG refuses to take keyboard input at the end of the process.

F5F Stay Refreshed Hardware Desktop DH57JG refuses to take keyboard input at the end of the process.

Pages (3): 1 2 3 Next

MarTiePie
Member

08-31-2016, 05:35 AM

As in the Title, I've got a Intel DH57JG and during post I am unable to enter the Boot menu options. I should be able to just hit F10 but when I do I get a Beep from the speaker and nothing happens. Here is a link to the manual for the mobo https://www.intel.com/content/dam/suppor...odSpec.pdf

MarTiePie

08-31-2016, 05:35 AM #1

gameraloguapo
Member

198

09-14-2016, 07:34 PM

No, I cannot access the bios options using F2.

gameraloguapo

09-14-2016, 07:34 PM #2

No, I cannot access the bios options using F2.

Assou23
Member

121

09-30-2016, 03:08 AM

I used it for a while but it got really sensitive. Eventually I sold it because there were too many odd behaviors. Have you looked at the BIOS jumper settings to confirm proper connections? Also, it might help if you connect something other than the standard USB ports—like a PCIe card or a spare front panel device with a port—to see if it works through there instead of the back. Yes, that worked in my case. Lastly, you could adjust the boot order in BIOS, which I had to do several times due to strange POST actions.

Assou23

09-30-2016, 03:08 AM #3

Devies
Member

185

10-05-2016, 02:56 PM

It responds immediately to any key press, but the instructions warn it will only emit a single short beep when ready. Pressing keys repeatedly or using a different USB port causes it to sound on any key.

Devies

10-05-2016, 02:56 PM #4

_Skazz_
Junior Member

10-05-2016, 05:18 PM

Check if you're using a PS/2 or USB keyboard. Have you tried resetting the CMOS? If the BIOS is configured to block old USB devices, it won't recognize USB keyboards during startup.

_Skazz_

10-05-2016, 05:18 PM #5

Check if you're using a PS/2 or USB keyboard. Have you tried resetting the CMOS? If the BIOS is configured to block old USB devices, it won't recognize USB keyboards during startup.

worrying
Junior Member

10-05-2016, 05:57 PM

The board doesn’t have a PS/2 connection. Attempting to reset CMOS now. The legacy feature appears to be turned off, and it seems USB is the only option for keyboard input.

worrying

10-05-2016, 05:57 PM #6

The board doesn’t have a PS/2 connection. Attempting to reset CMOS now. The legacy feature appears to be turned off, and it seems USB is the only option for keyboard input.

476ms
Member

203

10-15-2016, 09:58 PM

Sorry, didn't check the manual first for the port layout, I was just spitballing. On page 51 of the manual, apparently there's a jumper setting that forces the machine to boot straight to CMOS where you should be able to make whatever changes you need.

476ms

10-15-2016, 09:58 PM #7

SoapSenpai
Junior Member

10-15-2016, 11:52 PM

The adjustment didn't make a difference. The device starts up but remains on that display.

SoapSenpai

10-15-2016, 11:52 PM #8

The adjustment didn't make a difference. The device starts up but remains on that display.

Lips
Senior Member

624

10-31-2016, 07:31 PM

Motherboard doesn't recognize the keyboard, use a standard USB device instead. Avoid Apple models for BIOS setup.

Lips

10-31-2016, 07:31 PM #9

Motherboard doesn't recognize the keyboard, use a standard USB device instead. Avoid Apple models for BIOS setup.

Freeib
Member

10-31-2016, 09:00 PM

#10

I've tested it on both my Apple Keyboard and my Logitech G610 Orion. I haven't used any older models. Eventually, either device will just produce a beep.

Freeib

10-31-2016, 09:00 PM #10

I've tested it on both my Apple Keyboard and my Logitech G610 Orion. I haven't used any older models. Eventually, either device will just produce a beep.

Pages (3): 1 2 3 Next