F5F Stay Refreshed Hardware Desktop Data retention is limited to one pathway.

Data retention is limited to one pathway.

Data retention is limited to one pathway.

K
khaledkb_
Senior Member
724
08-17-2020, 07:01 AM
#1
I experienced some issues with my CPU after performing certain tasks such as bending a pin and spilling thermal paste. The PC is running but only when using single-channel memory—both RAM sticks placed together in the A slots. The B slots remain non-functional even with one stick, causing a solid orange light. Could this be related to my CPU, motherboard, or perhaps the memory? Both memory units have been tested and are working correctly. (Ryzen 5 3600, Corsair Vengeance LX 3200MHz, ASUS TUF Gaming B550 Wi-Fi)
K
khaledkb_
08-17-2020, 07:01 AM #1

I experienced some issues with my CPU after performing certain tasks such as bending a pin and spilling thermal paste. The PC is running but only when using single-channel memory—both RAM sticks placed together in the A slots. The B slots remain non-functional even with one stick, causing a solid orange light. Could this be related to my CPU, motherboard, or perhaps the memory? Both memory units have been tested and are working correctly. (Ryzen 5 3600, Corsair Vengeance LX 3200MHz, ASUS TUF Gaming B550 Wi-Fi)

X
xRoGxGoDz
Junior Member
38
08-17-2020, 09:32 PM
#2
Review your motherboard manual to verify the RAM is placed in the correct slots (typically A2 or B2, which are the second and fourth slots).
X
xRoGxGoDz
08-17-2020, 09:32 PM #2

Review your motherboard manual to verify the RAM is placed in the correct slots (typically A2 or B2, which are the second and fourth slots).

C
ChampMan
Member
97
08-18-2020, 12:06 AM
#3
It seems a pin was likely broken or misaligned related to the memory channel, leaving limited options. If repositioning the pin doesn’t help, you’re in a strong position. The device will still send a response no matter where the DIMMs are placed.
C
ChampMan
08-18-2020, 12:06 AM #3

It seems a pin was likely broken or misaligned related to the memory channel, leaving limited options. If repositioning the pin doesn’t help, you’re in a strong position. The device will still send a response no matter where the DIMMs are placed.

K
Kopertinjin
Member
70
08-19-2020, 03:04 PM
#4
I tried both setups with a gap in between, but neither worked. (This was before the CPU incident) The orange light indicator continues to show the same result.
K
Kopertinjin
08-19-2020, 03:04 PM #4

I tried both setups with a gap in between, but neither worked. (This was before the CPU incident) The orange light indicator continues to show the same result.

_
___iRekt___
Senior Member
505
08-20-2020, 07:27 PM
#5
I've observed devices that failed to respond when RAM was improperly installed.
_
___iRekt___
08-20-2020, 07:27 PM #5

I've observed devices that failed to respond when RAM was improperly installed.

H
Hidekih
Posting Freak
849
08-20-2020, 09:12 PM
#6
I'll continue operating on a single channel indefinitely.
H
Hidekih
08-20-2020, 09:12 PM #6

I'll continue operating on a single channel indefinitely.

J
JamesHond7
Posting Freak
838
08-20-2020, 11:05 PM
#7
The system failed to post despite no changes being made to the RAM initially. It was only posted again after removing a RAM stick from the B channel.
J
JamesHond7
08-20-2020, 11:05 PM #7

The system failed to post despite no changes being made to the RAM initially. It was only posted again after removing a RAM stick from the B channel.

S
shupshep
Member
143
08-20-2020, 11:27 PM
#8
It seems to be about DDR4 issues. You might find the video useful, but often bent pins or faulty memory channels cause the memory not to appear while the system still boots. Inspect the DIMM slots on your board for damage. Updated September 4, 2020 by Mateyyy
S
shupshep
08-20-2020, 11:27 PM #8

It seems to be about DDR4 issues. You might find the video useful, but often bent pins or faulty memory channels cause the memory not to appear while the system still boots. Inspect the DIMM slots on your board for damage. Updated September 4, 2020 by Mateyyy

L
LockD0wn
Member
110
08-22-2020, 09:41 PM
#9
I noticed the clip might have been unclear in your initial message, and it seems the pin is fully bent. It’s hard to tell how it differs from others now.
L
LockD0wn
08-22-2020, 09:41 PM #9

I noticed the clip might have been unclear in your initial message, and it seems the pin is fully bent. It’s hard to tell how it differs from others now.