F5F Stay Refreshed Hardware Desktop CPU temperature spikes to 60°C during idle mode and rises to 100°C under heavy usage.

CPU temperature spikes to 60°C during idle mode and rises to 100°C under heavy usage.

CPU temperature spikes to 60°C during idle mode and rises to 100°C under heavy usage.

Pages (3): Previous 1 2 3
X
xNoBeef
Member
133
08-10-2022, 06:28 PM
#21
I'm curious about using premium thermal paste such as Thermal Grizzly Kryo. It might help with heat management, but I’m not sure if it’s the best solution. If you prefer, I can explore aftermarket cooling options like the Noctua Low Profile or Arctic Coolers to see what works better.
X
xNoBeef
08-10-2022, 06:28 PM #21

I'm curious about using premium thermal paste such as Thermal Grizzly Kryo. It might help with heat management, but I’m not sure if it’s the best solution. If you prefer, I can explore aftermarket cooling options like the Noctua Low Profile or Arctic Coolers to see what works better.

I
ISY_0815
Senior Member
566
08-12-2022, 06:58 PM
#22
You can verify your current clock speed by checking the system settings or using a hardware diagnostic tool.
I
ISY_0815
08-12-2022, 06:58 PM #22

You can verify your current clock speed by checking the system settings or using a hardware diagnostic tool.

L
loxgirlfriend
Member
209
09-02-2022, 05:31 AM
#23
They produce their own boards, which means they won’t cause voltage spikes to the CPU.
L
loxgirlfriend
09-02-2022, 05:31 AM #23

They produce their own boards, which means they won’t cause voltage spikes to the CPU.

A
alondra_malfoy
Member
152
09-02-2022, 05:49 AM
#24
The cooler is installed correctly with adequate thermal paste, and the fan operates at standard speed. I’m unsure what else could be causing the issue. It’s worth checking if the CPU’s power consumption matches its 95W TDP or if it’s drawing more. Adjusting voltage through software might help if the CPU is being over-voltaged by the system, even if not currently doing so.
A
alondra_malfoy
09-02-2022, 05:49 AM #24

The cooler is installed correctly with adequate thermal paste, and the fan operates at standard speed. I’m unsure what else could be causing the issue. It’s worth checking if the CPU’s power consumption matches its 95W TDP or if it’s drawing more. Adjusting voltage through software might help if the CPU is being over-voltaged by the system, even if not currently doing so.

J
jonleflar
Member
181
09-05-2022, 04:36 AM
#25
I see... this matches what you were looking at. It's a Norwegian page about Deepcool Ice Blade.
J
jonleflar
09-05-2022, 04:36 AM #25

I see... this matches what you were looking at. It's a Norwegian page about Deepcool Ice Blade.

Pages (3): Previous 1 2 3